Lama Distributing Inc.




Types
• XLDBGLG - works in 2-1/8” to 5” inch upper & down holes
• UP003660 - same bag as XLDBGLG with 6 feet of OBF-25 flat rope already attached 
• UP112826 - works in 3-5 inch down holes
• UP211936 - works in 2-21/2 inch upper holes

Application
• Carry boosters to proper location in drilled hole
• UP112826 can be used as a plug (break through hole) with OBF25 flat rope securing it to screen
• Improve loading time, cuts costs
• Custom design bags to your needs

Features:
• Easy to work with during loading procedures
• Bright colour easy to see
• Pliable to irregular hole size
• Double stitched in heavy pushed areas
• Can be used in water filled holes to avoid floating of booster(s)

Benefits:
• Reduce loading time
• Available for multiple hole sizes from 2" to 6"
• Easy to install and remove if necessary during loading
• Can also be used to hold powder at desired depth using our OBF product to secure

How they work as a carrier
• cut OBF-25 flat rope to desired length for proper positioning of  booster(s)
• secure OBF-25 flat rope to bag 
• attach booster (s) to OBF-25 flat rope using tape
• fasten non-electric or electric cap to booster (s)
• place bag on end of loading hose feed bag and hose to bottom of hole
• start loading procedure holding on to cap lead (s) till product holds them in position
• load hole to collar height

How they work as a plug- carrier
• cut OBF-25 flat rope to proper length leaving enough to fasten to screen
• secure OBF-25 flat rope to bag 
• attach booster (s) to OBF-25 flat rope using tape
• fasten non-electric or electric cap to booster (s)
• place bag on end of loading hose feed bag and hose to bottom of hole
• fasten OBF-25 flat rope to screen this will hold the bag in position along with the booster (s)
• start loading procedures holding on to cap lead (s) till product holds them in position
• load hole to collar height

 




Polyester flat rope, ultra weather resistant, shock resistant, ease of use, resists rot and has a breaking strength of 650lbs under normal use. Available in two different sizes and comes with hardboard (not cardboard) sides.

OBF – 25 - ½” WIDTH BY 2000’ 
OBF – 50 - ½” WIDTH BY 3900’ 
OBF –100 - 5/8” WIDTH BY 3000’




Pouches are available in two sizes to fit either half mask or full mask. Features include a Velcro closure on pouch, adjustable belt and heavy duty belt clip.




Heavy duty canvas bag made of 12 oz. quality canvas that is water, rot and mildew resistant. PVC vinyl reinforced bottom and extra snap compartment inside. Snap hook closure outside and extra strong padded nylon shoulder strap for comfort. Approximate size 10” X 16” X 8”




Welder’s Spatts made from 3 ½ oz. quality split leather and are intended to protect footwear from hot metal splatter. Secured with Velcro and bottom elastic boot strap, one size fits all, moderate heat protection.




2” wide suspenders made from 6 oz canvas, and has one inch reflective stripping strip on back. Comes with adjustable strap and option of clips or loops for belts.




Made from tough 3” polyester webbing designed to hold various sizes of cap lamp batteries. Top 2” strap secures with Velcro. Approximate size (flat) 9 ½”(w) x 10 ½”(h)




The standard sizes we stock are 26”, 36”, 48” and 96” in length. These straps can be made to any size required. The breaking strength of the straps are 550lbs at normal use, they are also available in 32 different colours (Price may vary)