Direct and Soft Start Switchboards

These switchboards perform a large number of control and protection functions, and have an accessible configuration. Direct and soft start switchboards are equipped with a storage device that enables performance data of the ESP system to be recorded on a real time basis and any modifications of the ESP system settings to be captured, including the date and time of such modifications. These data can be downloaded via a COM-PORT to a PC or to a parameter reading and entry device, transmitted to the SCADA system via a special interface or downloaded to a flash memory via a USB port.

 

Industry standard Mechanical and Electrical interlocks and protective devices provide a high level of safety for the operator including separate compartments for high and low voltage. All voltage ranges use vacuum contactors and fused PTs for the protection of equipment and fast-acting disconnect in the event of a fault.

 

"Borets" Switchboards

 

These switchboards are supplied with Kaskad 2-200 motor controller that has four levels of protection to prevent non-authorized modification of settings. It is equipped with an integrated LCD and nonvolatile memory.

 

All enclosures are rated for outdoor use as IP43.

Operating temperatures range from -60°C to +50°C.

 

AxiomТМ series Switchbords is compatible with all standard Borets controllers, including the CommanderTM series. Otherwise, AxiomТМ switchboard is supplied with a controller customized to specific well conditions.

 

Three voltage ranges provide solutions to a broad application base without compromise of functionality or cost.

All enclosures are rated for outdoor use as IP53, which is very similar to Nema 3R.

Operating temperatures range from -20°C to +55°C.