TechnoSub
Engine Driven Pumps
Hyper High Head Auto Prime
Technosub Standard High Head Auto Prime pumps are specifically designed to effectively handle a wide range of liquids in applications such as liquid transfer, wash down, fire protection, fracking and jetting where high heads and pressure are required. Technosub High Head Auto Prime pumps provide a dependable, highly efficient solution in a completely automatic priming pump.
Caracteristics
- Rugged, heavy duty pumps engineered specifically for portable application.
- Belt-driven cacuum pump provides high air handling and a fully automatic priming system.
- Fully guarded coupling, pulley and belting.
- High efficiency air separation tank separates air and water before entering the pump.
- Condensation chamber with drain contains any condensation or water vapor from the air.
- Oil recovery system separates and remove oil and other particulates from the discharge air.
- Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure.
- Standard engine control panel provides preset emergency shutdown protection.
- Standard skid-mounted format with integral fuel tank, tie downs, lifting bail and fork pockets.
Options
- Fuel tanks for extended run times and/or remote location as required.
- Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks.
- Trailer brakes can be offered as required.
- Sound attenuated enclosure options.
- CD4MCu stainless steel pump ends for corrosive and abrasive applications.
- Hose racks, accesory containers and other custom features available as required.
- Wide range of suction and discharge fittings including Quick Disconnect, CamLock and Victaulic fittings and accessories.
- Various motor sizes available pending operating point.
Standard High Head Auto Prime
Technosub Standard High Head Auto Prime pumps are specifically designed to effectively handle a wide range of liquids in applications such as liquid transfer, wash down, fire protection, fracking and jetting where high heads and pressure are required. Technosub High Head Auto Prime pumps provide a dependable, highly efficient solution in a completely automatic priming pump.
Caracteristics
- Rugged, heavy duty pumps engineered specifically for portable application.
- Belt-driven cacuum pump provides high air handling and a fully automatic priming system.
- Fully guarded coupling, pulley and belting.
- High efficiency air separation tank separates air and water before entering the pump.
- Condensation chamber with drain contains any condensation or water vapor from the air.
- Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure.
- Standard engine control panel provides preset emergency shutdown protection.
- Standard skid-mouted format with integral fuel tank, tie downs, lifting bail and fork pockets.
Options
- Fuel tanks for extended run times and/or remote location as required.
- Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks.
- Trailer brakes can be offered as required.
- Sound attenuated enclosure options.
- CD4MCu stainless steel pump ends for corrosive and abrasive applications.
- Hose racks, accessory containers and other custom features availables as required.
- Wide range of suction and discharge fitting including Quick Disconnect, CamLock and Victaulic fittings and accessories.
- Various motor sizes available pending operating point.
Source: https://www.technosub.net/en/products/engine