Trinum
Fabrication
WESTROCK – STEEL STRUCTURE
LOCATION La Tuque, Québec
YEAR OF REALIZATION 2019
PROJECT TYPE CAPEX
To allow for a change in its packaging product manufacturing process, the Westrock plant had to modify part of its Building #1. The integration of mechanical elements and the necessary modifications to the steel structures posed a significant design challenge.
TRINUM uses high-performance computer tools to work with complex structural geometries in 3D. Our designers were therefore able to produce all of the drawings for the project. In addition, our structural engineer was able to validate the structural calculations and all the connections.
IAMGOLD – ORE CHUTE
LOCATION Suriname
YEAR OF REALIZATION 2016
PROJECT TYPE CAPEX
Iamgold is a Canadian mining company operating a large gold mine in Suriname, South America. To increase the ore’s processing capacity, the mine undertook construction work which included the addition of a large chute for the passage of high-tonnage minerals.
Given the technical complexity of the ore chute, the manufacturer commissioned TRINUM to design it. Our expertise in the design of ore transfer points made it possible to optimize the wear plates, validate the ore flow and manufacture a chute that is easy to transport to South America and easy to install on site.
CANADIAN MALARTIC – CONVEYOR AND CHUTE
LOCATION Malartic, Québec
YEAR OF REALIZATION 2016
PROJECT TYPE CAPEX
The Canadian Malartic mine is the largest open pit gold mine in Canada. In 2016, they decided to build a new truck unloading station to feed the ore stock pile. The project required the following equipment:
- An discharge hopper
- An Apron feeder
- A 180-meter conveyor with an underground section
- A transfer tower to an existing conveyor
- A transfer chute
The site configuration was problematic as the unloading of the new conveyor had to feed the existing conveyor at a 90-degree angle. The design of the transfer point and the detail of the chute was therefore particularly delicate.
In collaboration with the equipment manufacturer, TRINUM designed and produced all the manufacturing plans for the conveyor, transfer tower and main chute. TRINUM’s expertise in numerical modeling of bulk solid material flow was a determining factor in the project’s success. Indeed, our experts used advanced simulation and numerical calculation tools to ensure that the 90-degree drop would operate under all conditions without any blockages.
Our technicians supervised construction and start-up. The mine has not reported any problems with this equipment in over 4 years of use.
Source: https://trinumexperts.com/en/type-realisations/fabrication/#filter-realisations
Chargé de projet convoyeur Télétravail | Côte-Nord
- Conception de système électro-mécanique du secteur minier et forestier;
- Faire de la mise en plan ainsi que de la modélisation d'équipements de manutention avec Inventor et/ou Solidwork;
- Implanter les procédures qualité et en assurer le suivi
Dessinateur mécanique | Télétravail | Abitibi-Temiscamingue
- Faire de la mise en plan ainsi que de la modélisation d'équipements de manutention avec Inventor et/ou Solidwork;
- Conception de structure mécano-soudée et charpente métallique;
- Environnement de travail dynamique et stimulant
Dessinateur mécanique | Télétravail | Côte-Nord
- Faire de la mise en plan ainsi que de la modélisation d'équipements de manutention avec Inventor et/ou Solidwork;
- Conception de structure mécano-soudée et charpente métallique;
- Environnement de travail dynamique et stimulant
Chargé de projet convoyeur | Télétravail | Abitbi
- Conception de système électro-mécanique du secteur minier et forestier;
- Faire de la mise en plan ainsi que de la modélisation d'équipements de manutention avec Inventor et/ou Solidwork