Home > Supplier Companies > Aquatech > Articles > High Head and Jetting/HL...
Aquatech

High Head and Jetting/HL Series

Jul 8, 2020
AQUATECH’s High Head and Jetting HL series pumps are prime choice for those applications that require high pressure and high volume demands, such as quarry pumps or temporary fire pumps. With both diesel and electrically driven models available, AQUATECH carries options that range from 3” (80mm) to 10” (250mm) outlets with flows from 200 US gal/min to 4000 US gal/min. These are fully automatic, self-priming units that use the PrimeGuard feature, which allows for specific pressure control.
 
In addition to carrying certified models that are specifically designed for underground applications, clients can also choose from critically silenced as well as trailer mounted units. These permit the easy removal of a skid-mounted pump for those difficult to access job locations. We’re also equipped with 13 High Lift and Extreme High Lift models to better meet the wide variety of flow and pressure/head requirements in jobs today.
 
 
HL80M Dri-Prime® Pumps
 
The HL80M Dri-Prime 4" x 3" (100mm x 75mm) centrifugal pump is unique in the portable pumping industry. It’s like having two pumps in one. High pressure discharge capabilities to 150 psi (10.3 BAR) make the HL80M perfect for closed system pumping, water main testing, and wellpoint jetting. The HL80M also can be used as a typical open trench solids handling trash pump with no changing of parts. Constructed of hardened alloys for long life in rugged applications, a combination of automatic self-priming, solids handling and high pressure capabilities, make the HL80M Dri-Prime perfect for mines, quarries and industrial use.
 
Features
  • Close coupled automatic self-priming 4" x 3" (100mm x 75mm) centrifugal pump with vacuum priming compressor mounted to a diesel engine. Available in electric drive or as bare shaft pumpend.
  • All cast iron construction with cast chromium steel impeller. Also available in stainless steel and hardened steel alloy.
  • Extensive application flexibility - will handle slurries and liquids with solids up to 1" (25mm) in diameter.
  • Continuously operated “Godwin” air ejector priming device requiring no form of periodic adjustment or control.
  • Dry running, oil bath, mechanical seal with abrasion resistant solid silicon carbide interfaces.
  • Solids handling ball type Non Return valve with renewable flexible rubber seat and quick release access feature.
  • Compact unit mounted on skid base or two wheeled highway trailer, both incorporating integral overnight running fuel tank.
  • Simple maintenance - normally limited to checking engine oil and seal cavity oil levels.
  • Standard John Deere 4045D or Caterpillar 3054NA engine. Also available with a variety of other engines including Hatz and Deutz.
  • A variety of silenced units are available.
 
 
HL110M Dri-Prime® Pumps
 
The Godwin Dri-Prime 4" x 3" (100 mm x 80 mm) HL110M pump is a heavy-duty, fully automatic selfpriming pump specifically offered for pumping under extreme high pressure discharge conditions or high discharge lift applications. The HL110M offers flow rates up to 500 GPM (115 m3/h), total dynamic heads up to 615' (185 m) and solids handling up to 0.787" (20 mm) in diameter. Like all Godwin pumps,the HL110M pump includes the Dri-Prime air ejector priming system for fully automatic priming up to 28' (8.5 m) of static suction lift.
 
Features
  • Fully automatic priming from dry to 28' (8.5 m) of suction lift.
  • Handles liquids with solids up to 0.787" (20 mm) in diameter.
  • Continuously operated Venturi air ejector priming system operated by an air compressor, requires no form of periodic adjustment or operator intervention.
  • Dual, high pressure, dry running solid silicon carbide inboard and carbon/stainless outboard mechanical seal with selfcontained oil-bath cooling.
  • Mounted to a structural steel skid with integrated 175 gal. (662 l) fuel tank and lifting bail. Optional road going trailer also available.
  • Standard engine - JD6068T. Other engines and electric motor also available upon request.

Specifications

  • Suction 4" (100 mm/125#)
  • Discharge 3" (80 mm/250#)
  • Max. Capacity 500 GPM (115 m3/h)
  • Max. Head 615' (185 m)
  • Max. Solids Handling 0.78" (20 mm)
  • Impeller Type Fully open
  • # of Blades 3
  • Max. Impeller Diam. 20" (465 mm)
  • Max. Op. Temp. 176°F (80°C)
  • Max. Working Press. 276 psi (19 BAR)
  • Max. Suction Press. 87 psi (6 BAR)
  • Max. Test Press. 413.25 psi (28.5 BAR)
  • Max. Op. Speed 2200 RPM
  • Normal Op. Speed 2000 RPM
  • Min. Op. Speed 1400 RPM
 

Source: http://aquatechpumpandpower.com/rentals_sales_details.php?High-Head-Jetting-HL-Series-Pumps-3