Industrial Pumping

Our range of industrial pumping solutions at Aquatech is designed to handle an array of applications in some of today’s most demanding environments. To help address the specific needs of our clients we carry pumps with an assortment of features and benefits.  These include:

• Temporary fire pumps and high pressure vessel cleaning with HL Dri-Prime pumps
• Stainless steel pumps for saline water transfer, desalination and oilfield brine
• Chemical flushing pumps

Our centrifugal pumps are used as process fluid pumps in a variety of configurations when high volumes and high pressure are required with short or long discharge into both opened or closed pressurized systems. These pumps have the capacity to handle a high solids ratio, as well as slurries and sludge.  The highly dependable construction means the mechanical seals can handle operating temperatures of up to 212°F.

Aquatech has diesel, hydraulic and electric centrifugal Dri-Prime pumps available in both CD and HL configurations.

Four HL250M diesel pumps and 1000’ of 18 HDPE used to supply cooling water to a coal power plant.	8” diesel pumps used to assist a critical 4 hour frac which included site supervision during operation.
HL10M diesel pumps were utilized for hydro testing gas metering skids that need to reach 8 million gallons/day at 96’ TDH.	Three HL10M diesel pumps flushing 16’ to 18’ fuel ines to remove all impurities prior to start up.
Two HL250M pumps supplying cooling water to an electric furnace.	Supplying temporary piping for cooling water to facilitate repairs at a power plant. Able to maintain 50% capacity of power generation.
A temporary fire pumping system drawing fresh water from a nearby river at a rate of 3.6 million gallons/day at 180 PSI.