ROCK-TECH

RESEMIN

Jul 21, 2020
Production Long-Hole Jumbos, Front Face Jumbos, Roof Bolters. Your best choice for jumbos and bolters in underground mining
 
They're our choice too. That's why Rock-Tech is the Eastern Canada Distributor for the RESEMIN line of underground drilling products.
 
WHY RESEMIN?
  • Simple and robust design
  • Reliable in extreme conditions
  • High quality standards (ISO 9001)
  • Short lead times
  • Remarkably cost effective
Production Long-Hole Jumbos
 
 
MUKI LHP
Front face drilling rig, electro-hydraulic, of 1.05 m width for tunneling in underground mining for small sections from 1.5 x 2.0 up to 3.5 x 3.5 m.
Upper Drill option, for Cut *apert* Fill method on sections from 1.5 m width at the bottom.
It comes with hydraulic boom of square section and feed beam forward with options for working with drill rods 8 to 10 feet lengths, options telescopic 6/10 and 8/10 feed lengths.
Equipped with Montabert drifter HC 50 (14 kW).
Chassis for heavy duty application, articulated 4WD, self-propelled diesel Deutz engine and Poclain hydrostatic transmission, electrohydraulic system for drilling.
 
 
MUKI LHBP
 
MUKI LHBP is an electro-hydraulic rig for long hole drilling, it has an hydraulic boom, 3AP model, with parallel holding.
Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW).
Full 360°, horizontal coverage with parallel holding is 2.45 m; maximum length of drilling up to 15m, diameters up to 74 mm bit, Reamer 127 mm.
Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling.
Applications:
  • Sub Level Caving, benching
  • Sub Level Stoping
  • VCR and cable bolting
Front Face Jumbos
 
 
MUKI FF
 
Front face drilling rig, electro-hydraulic, of 1.05 m width for tunneling in underground mining for small sections from 1.5 x 2.0 up to 3.5 x 3.5 m. Upper Drill option, for Cut *apert* Fill method on sections from 1.5 m width at the bottom.
It comes with hydraulic boom of square section and feed beam forward with options for working with drill rods 8 to 10 feet lengths, options telescopic 6/10 and 8/10 feedt lengths. Equipped with Montabert drifter HC 50 (14 kW).
Chassis for heavy duty application, articulated 4WD, self-propelled diesel Deutz engine and Poclain hydrostatic transmission, electrohydraulic system for drilling.
 
 
TROIDON 44 XP
 
Front face drilling rig, electric-hydraulic, of 1.3 m width for tunneling in underground mining and civil works, for small sections, from 2.5 x 2.5 m up to 4.2 x 4.2 m.
It incorporates the fastest rock drill of the market, Montabert HC 95 of 22 kW, equipped with Back Hammering to prevent rods stuck. The boom is 4AP model, with parallel holding and 1.2 m boom extension.
Carrier for heavy duty application, articulated 4WD, self propelled by Deutz diesel engine. Hydrostatic transmission Poclain / Sauer Danfoss.
The direct control system pilot hydraulically makes this rig highly reliable for operation.
 
Roof Bolters
 
 
BOLTER 88
 
BOLTER 88 is a drilling rig for mechanized roof bolting and meshing in medium-sized sections, from 4x4 up to 7 m high.
Equipped with Bolting Turret T88 equipped with two Montabert HC 50 rock drill and Magazine of bolts. It can install Split Set bolts, Rebar with resin or cement cartridges, Mechanical, Swellex, Hydrabolt, Rockbolts and Python. The drilling feed has a centralizer design which works like Mesh Holder when the mesh is installed on pieces. An independent boom mesh manipulator is offered as an option, allows mechanized meshing all the entire operation combined in a safe way for the operator.
Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling.
 
 
SMALL BOLTER 88
 
SMALL BOLTER 88 is a drilling rig for mechanized roof bolting, allows reinforce efficient and safe structures roofs in underground mines, for small-sized sections from 3.5 x 3.5 up to 5.6 m high.
Equipped with Bolting Turret T88, two Montabert HC 50 rock
drill and Magazine of bolts. It can install Split Set bolts, Rebar with resin or cement cartridges, Mechanical, Swellex, Hydrabolt, Rockbolts and Python. The drilling feed has a centralizer design which works like Mesh Holder when the mesh is installed on pieces.
Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling.
 

Source: https://www.rock-tech.com/products/resemin-products