Rust

ANTIRUST COATING

Super hard non-porous coating that kills rust and permanently seals out moisture, rust and corrosion. Excellent on rusted or new metal.

• Can be used to paint directly over rust.
• Seals rust permanently.
• No need to remove rust before applying.
• Dries to a perfect satin gloss and is used on exterior surfaces before final painting.
• For use on all ferrous metals.
• Can be applied over bare metal.
• Provides a thick scratch and chemical resistant coating.
• Fantastic anti-chip property.
• Colour: Black

• Rusty and painted surfaces should have paint removed.
• Dry, flaking rust should be removed with a wire brush.
• Wipe clean with W-Sol, Art. No. 890.113 to remove grease or dirt.
• Ensure surface is dry.
• Apply a second coat to completely seal the first. Allow to dry thoroughly before applying a second coat.

RUST CONVERTER

Dispersion based Rust Converter. Rust Converter neutralizes the corrosion process by converting rust and ferrous oxides into a stable and insoluble, blue-black Metallo-organic complex.

• May be painted over and filled after the reaction time (3 hours)
• Not harmful to the environment
• After the reaction time of 3 hours, the surface may be over painted with any commercial paint systems or with the underbody protection systems
• May also be filled with polyester fillers

• Primer
• Adhesion agent
• Corrosion protection
• Welding primer

• Reliably prevents further rusting with anti-oxidation formula

• Good application surface structure for further painting work.
• Suitable for use in conjunction with PU and MS polymer sealing compounds.

• Excellent long-term protection against oxidation.
• Outstanding resistance to splashed and salt water

• 300 °C (572 °F), and briefly up to 500 °C (932 °F)

• Solvent reduced.
• Complies with the VOC minimum content specified in the VOC Directive (1999/13/EC)