Machines Roger International
V-30 Boring Head
The V-30 head can be used for multiple underground drilling applications
• Slot raises (Conventional Pulling, Down Reaming or Blind Boring)
• Drain holes & service holes
• Electrical cable holes
• Ore and waste passes
• Ventiltion raises
A world of possibilities thanks to the versality of the V-30 from machines Roger International Inc.
The installation of the V-30 head on the drill mast is quick and simple
Versatility
When adapted to an ITH drill, the V-30 boring head lends itself to three methods of drilling, with drilling angles from 90 to 42 degrees.
Drilling conditions
The V-30 can drill in all rock conditions, be they highly fractured or not !
Source: http://www.machines-roger.ca/v-30_boring_head.ws
LONGHOLE DRILLER HELPER (VARIABLE WORK SCHEDULE AND LOCATION)
- Assist the driller in operating a Cubex drilling rig.
- Perform maintenance work on the drilling rig.
DIAMOND DRILLER HELPER (LARONDE, 5-2-4-3 SCHEDULE)
- Assist the driller in operating a diamond drilling rig.
- Perform maintenance work on the drilling rig.
DIAMOND DRILLER (LARONDE, 5-2-4-3 SCHEDULE)
- Operate a diamond drilling rig.
- Perform maintenance work on the drilling rig.
DIAMOND DRILLER HELPER (WESTWOOD, 4-3 SCHEDULE)
- Assist the driller in operating a diamond drilling rig.
- Perform maintenance work on the drilling rig.