V-King Drill Carrier
Features and benefits
• The V-King Drill Carrier was designed with the miner in mind. It was designed to be simple to operate and easy to maintain.
• The only requirement of the V-King drill carrier is to have access to the standard mine air supply. Once connected to mine air, the V-King Drill Carrier is capable of drilling 2 to 6 inch (50 - 150mm) holes.
• Drill setup is quick and simple..
• It's reduced size will allow to move the V-King from workplace to workplace with very little assembly required.
• If you are looking for a low cost, reliable machine, the V-King offers the best solution to your drilling needs.
Product Characteristics
• The V-King's reduced size will allow the V-King Drill Carrier to be transported in just about any size cage with minimal disassembly. The dimensions of the drill without the drill carriage are the following:
○ Width: 48 inches
○ Length: 71-1/4 inches
○ Height: 34-15/16 inches
• Exterior planetary drive system for ease of maintenance.
• Quick release mechanism on traction in order to facilitate moving between work sites.
• Tilting oil reservoir in order to provide easy access to interior components.
• Use of common hydraulic components throughout the carrier in order to reduce parts inventory and ensure availability.
• Extendable hydraulic jacks on the carrier in order to increase unit stability.
• Braking system on four wheels.
Drilling versatility
• Slot Raises
• Cable Bolting
• Fan Drilling
• Parallel Drillin
Source: http://www.machines-roger.ca/v-king_drill_carrier.ws
- Assist the driller in operating a Cubex drilling rig.
- Perform maintenance work on the drilling rig.
- Assist the driller in operating a diamond drilling rig.
- Perform maintenance work on the drilling rig.
- Operate a diamond drilling rig.
- Perform maintenance work on the drilling rig.
- Assist the driller in operating a diamond drilling rig.
- Perform maintenance work on the drilling rig.