Home > Supplier Companies > Tribco Inc. > Articles > Wet Friction Product...
Tribco Inc.

Wet Friction Product Specifications* CLUTCHTEX® P-7

Mar 10, 2014
100% KEVLAR® fiber composite material is a non-molded and non-paper, textile-reinforced polymer containing no asbestos. Offers improved performance for all wet clutch and brake applications, featuring dramatically higher energy threshold to failure. Available bonded to carrier plates.

 
Physical and Mechanical Properties

• Composition: 100% long KEVLAR® fibers and proprietary polymer binders feature higher temperature resistance than phenolics. Includes no metal, no abrasives, no cotton, and no fillers.
• Density: 0.88 g/cu. cm (0.032 lb./cu.in.)
• Shock resistance: Excellent (does not crack, chip, or break)
• Abrasiveness: Non-abrasive to opposing surfaces
• Porosity: Unique "open, continuous-pore'' structure (Characteristic of proprietary textile-reinforced composite production process)


Operating Conditions

• Static pressure: As limited by bond and carrier plate
• Dynamic pressure: 140 - 2760 kPa (20-400 p.s.i.) Upper limit not yet determined
• Oil Bath Temperature: Ambient to 150° C (300° F) in automatic transmission fluid. Ambient to 205° C (400° F) in silicone oil
• Lubricant/Coolant: No known limitations. Resists ethylene glycol.
• Opposing surface: No fine finishing required, runs against steel, iron, stainless steel, copper, hard aluminum.

Surface speed, temperature, and pressure are interdependent energy parameters. Values represent typical conditions and are not the ultimate limits of the material. Burnish time to achieve full mating surface contact can be three to five times that of conventional materials.

 
Approximate Wet Friction Properties
- in automatic transmission fluid (after extended burnish)

• Wear rate: 1/2 to 1/5 that of organics and paper, 1/2 to 1/3 that of sintered bronze materials
• Dynamic coefficient of friction: 0.10 to 0.15 µ in the 23 - 290 W/sq. cm range (0.2 - 2.5 HP/sq. in.). Approximately 10% higher than paper, maintaining coefficient beyond the energy limits of sintered bronze.
• Static to dynamic ratio: 1.05 - 1.15

Source: http://www.tribco.com/wetclutch.php

Magazine
No information