Featured Products

TITAN Pad Heaters are 0.075" (1.9mm) thin flexible heating pads that are attached to the outside of an oil pan or metal fluid reservoir such as a hydraulic tank. 

TITAN Pad Heaters are supplied with an installation kit and instructions for a complete installation; no special tools or skills are required.

The TITAN Fuel Filter Heater warms the filter housing to summer temperatures; this unplugs the gel in the oil filter to increase the flow and allows for sufficient fuel flow to start the engine.

The fuel temperature will increase above the pour point and melt any fuel/ice slush; this allows sufficient fuel to flow to the injection system ease of engine start up.

We have been rebuilding Lister-Petter air cooled engines for the past twenty five years; our in-house mechanices have over forty years experience with Lister-Petter engines.

Genuine Lister-Petter parts are used exclusively in the rebulid process.

Twin Disc Power Take-Offs are designed to fit all internal combustion engines with standard SAE flywheel housing dimensions from No. 6 through No. 0. 

The smallest size in the Spring Starter range, the Mini, is capable of starting engines up to 2.0 litres with a maximum of four cylinders.

Cabaire utilizes a centrifuge air precleaner to first remove large dirt particles from entering the air system, the air is then blown into the air conditioner intake duct by a self-contained air pump.

The second size up in the Spring Starter range, the Midi, is capable of starting engines up to 6.6 litres with a maximum of six cylinders.