Kirkland Lake Gold Ltd.
Kirkland Lake Gold Reports Wide, High-Grade Intersections in Saddle Zone at Detour Lake Mine, Drilling Extends Mineralization 200 Metres to West
TORONTO, Dec. 23, 2020 (GLOBE NEWSWIRE) -- Kirkland Lake Gold Ltd. (“Kirkland Lake Gold” or the “Company”) (TSX:KL) (NYSE:KL) (ASX:KLA) today announced results from 25 holes (19,523 m) and one wedge hole (1,110 m) of drilling at the Detour Lake property. The new holes being reported are the third batch of results from the recently announced 250,000 m exploration program, which the Company is targeting for completion by the end of 2021. The program is being completed to collect information for an updated, and potentially expanded, Mineral Reserve as well as to support the completion of a new production plan. Most of the new holes announced today are from drilling in the Saddle Zone, located between the Main Pit and West Pit locations, which has been underexplored and has no Mineral Reserves and only limited Mineral Resources. Several new holes are also being announced from the area west of the West Pit, which also contains only limited past drilling.
Tony Makuch, President and CEO of Kirkland Lake Gold, commented: “Today’s results provide further evidence that a much larger and higher-grade deposit exists around the Main Pit and West Pit locations at Detour Lake Mine than is currently included in Mineral Reserves. We continue to intersect broad zones of mineralization in the Saddle Zone between the two pits, which demonstrates the potential for continuous mineralization over very large area and supports our view that a much larger pit design concept may be warranted leading to substantial Mineral Reserve growth, increased levels of production and improved unit costs. In addition, with a growing number of high-grade intersections at depth, we are increasingly optimistic that both production levels and average grades can be augmented through the addition of an underground mining operation. We are also very encouraged by drill results on the west side of the property, which include extending mineralization 200 m west of the current West Pit location. We are still relatively early in our 250,000 m drill program and expect 2021 to be a very important year for establishing the full potential of the Detour Lake Mine.”
East Portion of Saddle Zone
Drilling in the east portion of the Saddle Zone included nine holes (7,586 m) and targeted areas along the Detour Mine Trend (“DMT”) directly west of the Main Pit Mineral Reserve shell between surface and 500 m below.
Significant results from the drilling including: 4.38 gpt over 31.0 m, including 47.46 gpt over 2.0 m and 5.45 gpt over 3.2 m, from hole DLM-20-028, 1.50 gpt over 75.0 m, including 3.59 gpt over 23.0 m, 1.33 gpt over 14.7 m, 0.87 gpt over 30.9 m and 0.78 gpt over 21.0 m from hole DLM-20-035, 1.11 gpt over 58.0 m and 0.73 gpt over 34.0 m from hole DLM-20-026 and 1.12 gpt over 46.0 m, 0.69 gpt over 17 m and 3.02 gpt over 4.0 m from hole DLM-20-020. All of these new holes were designed to intersect the DMT between surface and 200 m below and strongly confirmed the continuation of the DMT west of the current Main pit reserve.
Additional significant results from this area include: 4.02 gpt over 43.0 m, including 37.19 gpt over 3.0 m, 2.58 gpt over 70.9 m, including 31.05 gpt over 2.0 m, 1.00 gpt over 51.8 m, 0.78 gpt over 87.8 m and 1.40 gpt over 28.0 m from hole DLM-20-025A, 1.99 gpt over 55.4 m, 1.35 gpt over 63.0 m, 1.26 gpt over 76.0 m, 1.67 gpt over 37.0 m, 1.49 gpt over 36.3 m and 0.94 gpt over 65.0 m from hole DLM-20-041 and 1.64 gpt over 62.8 m, including 2.43 gpt over 34.8 m, 0.80 gpt over 68.0 m, 0.81 gpt over 74.0 m and 2.30 gpt over 14.0 m from hole DLM-20-039 which targeted the DMT between 200 and 450 m below surface. As with the new near surface holes the drilling here strongly confirms the extension of mineralization westwards from the Main pit as well as results from previously reported from DLM-20-014A which intersected 1.42 gpt over 78.0 m, 1.08 gpt over 51.0 m, 1.21 gpt over 43.0 m and 0.90 gpt over 51.0 m (see press release dated September 9, 2020) in the area approximately 75 m east of DLM-20- 025.
Central Portion of the Saddle Zone
Drilling in the central portion of the Saddle Zone included five holes (4,563.5 m) and targeted the DMT approximately midway between the current reserve pits for the Main and West pits and between 100 and 500 m below surface.
Significant results from the drilling include: 1.10 over 67.0 m, 2.53 gpt over 18.0 m, 0.83 gpt over 27.7 m, and 0.94 gpt over 24.0 m, including 15.91 gpt over 2.0 m, from hole DLM-20-022, 2.65 gpt over 24.0 m, including 9.14 gpt over 5.0 m, 0.80 gpt over 79.0 m, 1.94 gpt over 13.6 m, from hole DLM-20-046B and 0.72 gpt over 76.0 m from hole DLM-20-44 which targeted the DMT between 100 and 250 m below surface. All of three of the new holes are considered highly successful and strongly demonstrate the continuity of mineralization along the DTM through the central part of the Saddle Zone and its extension to surface. The new intersections in hole DLM-20-046B are located approximately 100 m above previously reported results from Hole DLM-20-016 which included 1.10 gpt over 142 m, including 9.39 gpt over 2.0 m, 2.15 gpt over 16.0 m and 1.23 gpt over 12.0 m (see press release dated September 9, 2020).
Additional significant results from this area include: 8.13 gpt over 17.0 m, including 22.51 gpt over 5.9 m, 2.63 gpt over 21.3 m, including 20.39 gpt over 2.0 m; 2.34 gpt over 42.7 m, including 25.60 gpt over 2.5 m and 1.06 gpt over 40.0 m from DLM-20-037 and 1.54 gpt over 13.0, 0.89 gpt over 49.8 m and 0.82 gpt over 54.7 m from DLM-20-19 which intersected the DMT between 400 and 550 m below surface, demonstrating strong potential for expansion of the system to depth.
Results from all holes in this area are considered extremely encouraging as they continue to confirm the presence of a broad corridor of mineralization extending between the West and Main pits ( a distance of over 800 m) with the overall style of mineralization and gold tenor being very similar to that found in the West and Main pits.
West Portion of Saddle Zone
Drilling in the west portion of the Saddle Zone included two holes (2,403 m) and one wedge hole (1,110 m) which targeted the DMT directly east of the West pit between 400 and 550 m below surface.
Significant results from the drilling include: 1.85 gpt over 24.7 m and 1.86 gpt over 37.9 m, including 13.30 gpt over 2.0 m, from DLM-20-027W; 1.00 gpt over 44.7 m, including 9.84 gpt over 2.1 m and 0.88 gpt over 34.0 m, from hole DLM-20-021B; and 0.88 gpt over 42.0 m, 0.81 gpt over 58.0 m and 3.13 gpt over 6.0 m, from hole DLM-20-018. Hole DLM-20-27W intersected the DMT approximately 325 m below surface and 75 m above previously reported DLM-20-004 which included results of 1.41 gpt over 121.0 m and 1.03 gpt over 14.08 gpt (see press release dated June 29, 2020), while DLM-20-21B and DLM-20-018 intersected the DMT approximately 75 and 150 m below DLM-20-004.
Results from all three holes are considered very positive and strongly confirm the continuation of mineralization through the west portion of the Saddle Zone and into the area under the West pit.
West Pit Extension
Drilling in the east portion of the Saddle Zone included nine holes (4,971 m) and targeted areas along the DMT west of the West Pit Reserve between surface and 400 m below.
Significant results from the drilling include: 2.19 gpt over 39.8 m, including 21.32 gpt over 2.7 m and 0.84 gpt over 21.0 m from hole DLM-20-048B, 2.67 gpt over 21.0 m, including 17.67 gpt over 2.0 m and 1.57 gpt over 38.0 m from hole DLM-20-045, 0.66 gpt over 90.0 m, 47.53 gpt over 2.0 m and 0.69 gpt over 15.0 m from hole DLM-20-023; and 1.19 gpt over 23.8 m from hole DLM-20-038B. These holes targeted the DMT west of the current mineral reserve between 200 and 400 m level and provide strong confirmation that DMT and associated mineralization continues for at least another 200 m in this direction and remains open for testing.
Additional significant results include: 1.44 gpt over 42.0 m from hole DLM-20-042, 1.79 gpt over 39.0 m, including 12.23 gpt over 3.0 m from hole DLM-20-032, 0.93 gpt over 19.3 m from DLM-20 – 31 and 0.81 gpt over 18.0 m from hole DLM-20-029A. These holes targeted the westward extension between surface and 200 m below and demonstrate the continuity of mineralization in the new westward extension to surface.
Based on assay results and other observations obtained from the program to date, the outlook for the project continues to look encouraging with there being evidence of a broad and continuous corridor of mineralization extending between the West and Main pits and to a depth of at least 800 m below surface. The work also suggests that mineralization within the corridor is very similar to that found in the West and Main pits and is hosted mainly by broad zones containing variable amounts of quartz and pyrite, which are controlled mainly by east-west trending, moderately north dipping folds and shear structures which plunge at a shallow angle to the west. Given results to date, the potential to identify further extensions to mineralization as well as additions to Mineral Resources and Mineral Reserves between the Main and West pits through additional drilling is considered excellent.
Exploration work at Detour Lake is ongoing with eight drills current working, and on track to complete approximately 70,000 m by the end of 2020. The Company plans to increase the number of drills to between ten and twelve drills early in the new year.
About Kirkland Lake Gold Ltd.
Kirkland Lake Gold Ltd. is a growing gold producer operating in Canada and Australia that is on track to produce 1,350,000 – 1,400,000 ounces of gold in 2020. The production profile of the Company is anchored by three high-quality operations, including the Macassa Mine and Detour Lake Mine, both located in Northern Ontario, and the Fosterville Mine located in the state of Victoria, Australia. Kirkland Lake Gold's solid base of quality assets is complemented by district scale exploration potential, supported by a strong financial position with extensive management expertise.
For further information on Kirkland Lake Gold and to receive news releases by email, visit the website at www.kl.gold.
Source: https://www.kl.gold/news-and-media/press-release-details/2020/Kirkland-Lake-Gold-Reports-Wide-High-Grade-Intersections-in-Saddle-Zone-at-Detour-Lake-Mine-Drilling-Extends-Mineralization-200-Metres-to-West/default.aspx
ASSET PROTECTION CONTROL ROOM GUARD
Based at the Detour Lake Mine site, we currently have an exciting opportunity for a Asset Protection Control Room Guard to join our Asset Protection team reporting to the Asset Protection Supervisor.
SHAREPOINT DEVELOPER
We currently have an exciting opportunity for a SharePoint Developer to join our Business Intelligence Team.
MINE PLANNING TECHNICIAN TRAINEE
Based at the Detour Lake Mine site, we currently have an exciting opportunity for a Mine Planning Technician Trainee to join our Technical Services team reporting to the Mine Planning Superintendent.
SENIOR MINE GEOLOGIST
Based at the Canadian Operations Centre in Timmins, ON, we currently have an exciting opportunity for a Senior Mine Geologist to join our Geology team reporting to the Geology Superintendent.
PROCESS PLANT RELIABILITY ENGINEER
Based at the Detour Lake Mine site, we currently have an exciting opportunity for a Process Plant Reliability Engineer to join our Process Plant Maintenance team reporting to the Reliability Supervisor.
CORE TECHNICIAN
The Core Technician will be responsible to support the Geology departments by processing and sampling/cutting of diamond drill core.
ASSAYER 1
The Assayer 1 processes Mine Production and Exploration samples for grade control providing vital information in a timely method to assist in key decision making relating to mining/geology activity and reconciling samples entering and exiting the Mill Process.
MINE PLANNER/EIT
The Mine Planner/EIT will be responsible for mine planning within the 3 - 6 month planning interval.
ASSAYER 2
The Assayer 2 processes Mine Production and Exploration samples for grade control providing vital information in a timely method to assist in key decision making relating to mining/geology activity and reconciling samples entering and exiting the Mill Process.
ASSAYER 3
The Assayer 3 processes Mine Production and Exploration samples for grade control providing vital information in a timely method to assist in key decision making relating to mining/geology activity and reconciling samples entering and exiting the Mill Process.