Wesdome Gold Mines Ltd.
WESDOME ANNOUNCES POSITIVE RECONCILIATION RESULTS FROM THE KIENA DEEP BULK SAMPLE
TORONTO, April 12, 2021 (GLOBE NEWSWIRE) -- Wesdome Gold Mines Ltd. (TSX: WDO) (“Wesdome” or the “Company”) today announces positive results from underground bulk sample program on the Kiena Deep A Zone at the Company’s 100% owned Kiena Mine Complex in Val d\'Or, Quebec. The bulk sample provided an opportunity to confirm the geologic interpretation of the deposit, test for spatial and grade continuity of the mineralized structures, validate key assumptions of the mineral resource estimate and assess the rock quality characteristics.
Highlights of the Bulk Sample
- A total of 7,032 tonnes were processed from the bulk sample at the Kiena mill. The 7,032 tonnes milled as part of the bulk sample represents the planned area of the bulk sample. Additional lower grade material outside of the planned area of the bulk sample was stockpiled on surface.
- Successfully tested an area within the December 15, 2020 Mineral Resource Estimate and confirmed the continuity of the high-grade gold mineralization within the A and A1 Zones.
- The bulk sample recovered 6% more gold than the MRE with a feed grade of 15.7 g/t versus model grade of 14.7 g/t.
- Geotechnical conditions were sound overall and allowed the Company to assess and optimize development protocols.
- Total gold produced was 3,479 ozs with gold recovery in the Kiena mill of 98.2%.
- To date, gold sales of 1,500 ounces of gold in Q4 2020 and 1,793 ounces in Q1 2021 have been sold, with the remaining to be sold in Q2.
Notes on reconciliation table - December 15, 2020 – Block Model refers to the Company\'s technical report, titled “Update of the Mineral Resource Estimate for the Kiena Mine Complex Project, Val-d’Or, Québec, Canada.”
- Mill Feed contained ounces and head grade calculated based on gold produced from the Kiena Mill, including mill tails which graded 0.28 g/t
- A total of 7,032 tonnes were subsequently processed at Kiena mill. Reconciliation was completed on milled tonnes only.
- The total tonnes surveyed is the base line to do the analysis towards the Resource Block Model (BM). Tonnes of the BM corresponded to the same elevation and equivalent lateral limits.
- When the calibration of tonnes was completed, in situ ounces, were redistributed to the areas that have been mined. The percentage of recovery from Mill was considered during the process.
- The grade of the muck samples allowed for the redistribution of the ounces on a pro rata basis, by zone sent to the Mill.
Mr. Duncan Middlemiss, President and CEO commented, “We are very pleased with the results of the bulk sample that confirmed the continuity of the high-grade gold mineralization of the A Zone, but more importantly demonstrated a 6% positive reconciliation in the number of ounces recovered from the bulk sample compared to the resource block model. This is very positive, and provides confidence in the resource estimate for future mining.
We are also very encouraged with the recommissioning and performance of the Kiena mill with gold recovery in excess of 98%. This certainly confirms the readiness of the mill for future production. As well, we are in the final stage of completing the pre-feasibility study and intend to publish the results this quarter.
In addition, we are continuing our aggressive exploration drilling program to further expand the A and VC zones and to follow-up on our discovery of new zones of high-grade occurring within 50 m of the footwall of the A Zone. All of these intersections illustrate the untested potential of the entire gold system proximal to the Kiena mine infrastructure and the probability of adding high grade ounces per vertical meter.
We are also currently ramping up a large surface exploration program, with the aim of unlocking additional value on the Kiena property further to the west and east of the Kiena mine initially, and later, over the entire property.”
Kiena Deep A Zone Bulk Sample
The bulk sample consisted of 3.7 m x 4.0 m lateral development on the 111 Level along the A Zone and A1 Zone (Figure 1 and 2).
A total of approximately 66 drift rounds were blasted, which allowed for thorough geotechnical assessment and geological mapping, photographing and sampling from the faces of each development round. Chip and muck sampling was completed systematically to determine average grade for each round. A total of 984 muck and 238 chip samples were collected in addition to quality control samples. During the development of this portion of the A Zone, visible gold was observed on about 75% of the faces (Figure 4).
The initial development has confirmed the continuity of the A Zones high grade gold mineralization along strike. Visible gold is associated with folded quartz veins which are located within an overall zone of strong amphibole alteration within a sheared corridor. The amphibolite is located at the contact between basalt/feldspar porphyry dyke and ultramafic rocks. Detailed muck and chip samples (uncapped) presented in Figure 3, shows the grade and geological continuity. Reconciliation with capped muck samples (165 g/t Au) was 8% above mill feed.
Processing of the Bulk Sample
The Kiena mill was restarted to process the Kiena Deep bulk sample. The development material came from two zones, namely the A and A1 Zones. The milled tonnage was measured using a conveyor scale. Daily throughput reached up to 41 tonnes per hour (“tph”) with no issues during the extraction of the bulk sample. The grade and recovery values provided by the mill were determined using multiple sampling points, per cent solids measurements, tailing grade sampling, laboratory analysis and refined ounces (during the milling) and the ounces recovered during the cleaning of the SAG and ball mills after milling was completed.
All calculations and sampling methods have been validated using an independent mineral processing consultant. The material recovered during the cleaning of the balls mills was sent to a third-party refiner, Sipi Metals Corp (precious metal refinery based in Chicago, USA) and was included in the overall bulk sample reconciliation.
ABOUT WESDOME
Wesdome Gold Mines has had over 30 years of continuous gold mining operations in Canada. The Company is 100% Canadian focused with a pipeline of projects in various stages of development. The Company’s strategy is to build Canada’s next intermediate gold producer, producing 200,000+ ounces from two mines in Ontario and Quebec. The Eagle River Complex in Wawa, Ontario is currently producing gold from two mines, the Eagle River Underground Mine and the Mishi Open pit, from a central mill. Wesdome is actively exploring its brownfields asset, the Kiena Complex in Val d’Or, Quebec. The Kiena Complex is a fully permitted former mine with a 930-metre shaft and 2,000 tonne-per-day mill. The Company has further upside at its Moss Lake gold deposit, located 100 kilometres west of Thunder Bay, Ontario. The Company has approximately 139.4 million shares issued and outstanding and trades on the Toronto Stock Exchange under the symbol “WDO”.
Source: https://www.wesdome.com/news/press-releases/#97c8583ab28938f47cf921cf9f234859
|
IT Analyst
This position is responsible for supporting end-users primarily at our Eagle River Mine Complex.
Junior Accountant
This position is accountable for supporting accounting processes as well as the processing of accounts payable in a manner consistent with established policies and procedures.
Senior Mine Geologist, Eagle River Mine
• Promote safe work practices and safety culture within a production-oriented environment.
• Maintain drill hole databases and monitor underground diamond drill programs.
• Supervise and participate in the selection of underground diamond drill targets.
Surface Maintenance (Hourly)
Ensure that all buildings, and infrastructures on Wesdome property, as well as roads, culverts, & bridges are properly maintained Work in a safe, environmentally friendly, and cost-effective manner.
Heavy Duty Equipment Mechanic
Heavy Equipment Mechanic is responsible, as part of a team, for maintaining the equipment and mechanical systems of the Eagle River Mine site to ensure smooth and continuous operation.
Maintenance Planner
- Reporting to the Maintenance Projects, Mobile & Mine Fixed Plant Superintendent
- Ensuring compliance with health and safety and environmental regulations and policies is of primary importance with this position.
Hoist Mechanic/Millwright
Reporting to the Eagle River Maintenance Planner or designate, the successful candidate will perform the maintenance and repairs of all surface, underground stationary equipment, long hole buggies, compressors rock breakers and pumps at the mine site.
Manager – Asset Management & Reliability
Reporting to the Mine General Manager, the Manger of Asset Management & Reliability will be an inspirational and innovative leader responsible and accountable for operational performance excellence in the Asset Management and Reliability Department.
Process Plant Maintenance Millwright (RED SEAL CERTIFCATION REQUIRED)
- The Millwright is responsible for doing the maintenance of the milling operation equipment.
- Reports to Lead hand Millwright and Mill General Foreman
Chief Mine Geologist, Eagle River Mine
The Chief Mine Geologist will be responsible and accountable for all work conducted by the Geology Department while ensuring the work is safe, cost effective and makes the most efficient use of manpower and materials.