Home > Supplier Companies > Tribco Inc.

Contacts

Corporate:
Head Office
18901 Cranwood Pkwy
Cleveland, Ohio, USA
Fax: 1-(216)-486-2099
E-mail: sales@tribco.com
Post Code: 44128

Telephone: 1-(216)-486-2000

Tribco Inc.



Website: http://www.tribco.com
 
Address: 18901 Cranwood Parkway
PO Box 28547
Cleveland, Ohio
United States
44128
Phone: +1 (216) 486-2000
Fax: +1 (216) 486-2099
Contact: Nick Bade, Marketing Director Email
Contact: Charles Peirce, Product Specialist Email
• Composition: 100% long KEVLAR® fibers and proprietary polymer binders. Includes no metal, no abrasives, no cotton, and no fillers.
• Density: 0.91 g/cu. cm (0.033 lb./cu.in.)
• Thermal conductivity: Extremely low
• Shock resistance: Excellent (does not crack, or break)
• Lubricant contaminant resistance: Does not degrade
• Abrasiveness: Non-abrasive to opposing iron, steel, and copper surfaces
• Composition: 100% long KEVLAR® fibers and proprietary polymer binders feature higher temperature resistance than phenolics. Includes no metal, no abrasives, no cotton, and no fillers.
• Density: 0.88 g/cu. cm (0.032 lb./cu.in.)
• Shock resistance: Excellent (does not crack, chips, or break)
• Porosity: Unique "open, continuous-pore'' structure (characteristic of proprietary textile-reinforced composite production process)

 

• Wear rate: 1/5 to 1/10 that of asbestos materials, 1/2 to 1/3 that of sintered bronze materials
• Dynamic coefficient of friction: 0.36 µ ± 0.1 in the 95 - 345° C range (200° F - 650° F). Approximately 25% higher than molded asbestos, glass -fibered, and graphitic materials
• Static to dynamic ratio: 1.05
• Fade: Significant fade to 260° C (500° F), accelerating at 370° C (700° F)
• Static pressure: As limited by bond and carrier plate
• Dynamic pressure: 140 - 2760 kPa (20-400 p.s.i.) Upper limit not yet determined
• Oil Bath Temperature: Ambient to 150° C (300° F) in automatic transmission fluid. Ambient to 205° C (400° F) in silicone oil
• Lubricant/Coolant: No known limitations. Resists ethylene glycol.
• Opposing surface: No fine finishing required, runs against steel, iron, stainless steel, copper, hard aluminum.