WEICON Inc.
WEICON Plast-o-Seal
|
Technical data:
• Temperature resistant: from -50°C up to +200°C, briefly up to +250°C
• Chemical base: polyester resin
• WEICON Plast-o-Seal Viscosity: 950.000 up to 1.650.000 mPa•s
• Colour: blue (fluorescent)
• Gap filling: max 0,10 mm without gasket
• Working temperature: from +5°C up to +35°C.
• Specific weight: 1,12 g/cm³
• Shelf life: 24 months at room temperature (approx. +20°C)
Solvent free with no unpleasant odour enables immediate assembly
• For sealing the smooth treated flanges of machine, gearbox and motor casing flanges.
• To improve the performance of both old and new gaskets made from paper, cork, felt etc.
• Solvent free - odourless
• Remains permanently plastic, both before and after assembly.
• WEICON Plast-o-Seal Easy joint dismantling.
• Economical in use.
• Very good resistance to most fuels, mineral oils, water, air, coolant mixtures based on methanol and glycol, antifreezes, kerosene, fluorocarbon refrigerants etc.
• Max. gap filling capability up to 0,1 mm (without a gasket).
• Non-sag can be applied to vertical surfaces.
• Temperature resistant from -50°C to +200°C briefly up to +250°C
• WEICON Plast-o-Seal Compensates for manufacturing defects such as scoring and scratches enabling accurate assembly.
• Allows accurate assembly and construction with low tolerances.
• No need to overtighten fixings during assembly.
• Non corrosive
• Neither contains any substances that disturb lacquer wettings (e.g. silicone).
• WEICON Plast-o-Seal Fluorescent blue colour.
Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.