Home >
Suppliers Companies
> Drive-Line Incorporated >
Products > CARLYLE-JOHNSON > MDP Modules for Industrial Clutches and Brakes
Drive-Line Incorporated
MDP Modules for Industrial Clutches and Brakes
|
The MAXITORQ® Disc Pacs can be used with air, hydraulic, electric or manually operated industrial clutches and brakes. The Disc Pac keys to a shaft and is available in eight sizes from 2" to 8" diameter with over 100 variations. The static torque averages from 4 lb. ft. to 2000 lb. ft. All assembly, disassembly and adjustments are manual. No special tools are required. Standard ring cups and flange driving cups are available if desired. The Disc Pac can be used as a multiple disc clutch or brake, an overload release clutch or a torque-limiting device.
The MAXITORQ® Disc Pacs can be used with air, hydraulic, electric or manually operated industrial clutches and brakes. The Disc Pac keys to a shaft and is available in eight sizes from 2" to 8" diameter with over 100 variations. The static torque averages from 4 lb. ft. to 2000 lb. ft. All assembly, disassembly and adjustments are manual. No special tools are required. Standard ring cups and flange driving cups are available if desired. The Disc Pac can be used as a multiple disc clutch or brake, an overload release clutch or a torque-limiting device.
The MAXITORQ® Multiple Disc Pac will allow you to assemble industrial clutches and brakes to your own specifications
Simplicity of design offers high versatility
Compact and self contained
Available in 8 standard disc diameters
Completely assembled
Separator springs assure a drag-free neutral
Standard lugs configurations vary from 3 to 12 lugs, depending on torque rating; splines are also available
No special tools required for installation or maintenance
Disc design and finish ensure maximum wear-ability and smooth engagement
Can be run dry or in oil
Economical standard driving cups and flange cups are available
Torque range 5 lb. ft.- 2,000 lb. ft.