TL1, TL2 & TL3

MAXITORQ® torque limiters provides protection against overloads while sustaining torque so that shutdown and restart is not required. Acting like a torsion shock absorber to permit “slip” if the torque exceeds an adjustable pre-set level, these units are used in any application where obstructions can cause overloads or where production is sensitive to over tensioning.

 

Depending on  size, the torque limiters are adjustable over a wide torque range from 1lb.ft. to 1500 lb. ft. Small space-saver sizes from 2 3/16" to 8 5/8" O.D., and high torque potential make them the best possible choice for machine tools, conveyor systems, off-highway mobile equipment or any other application where obstructions can cause temporary overloads or where over- tensioning is a problem, as in textile or paper mills. Torque limiters can be pre-set to transmit torque constantly regardless of the speed of the drive mechanism. When a jam occurs, the torque limiter will slip but the torque level is accurately sustained.

 

High torque in a small size

Sustains torque level

Durable

Predictable dynamic and static torque

Easily adjustable over a wide range

Superior adjustment retention

Designed for easy rebuilt with no special tools required

Torque range 5 lb. ft.- 2000 lb. ft.