AFM Industries
Cleats
Hot Bonding process Protect Your Investment!
Our hot bonding process allows us to hot vulcanize both the cleats and sidewalls to the base belt, extending belt life in almost every application.
Advantages:
- Hot bonding dramatically increases the adhesion of the sidewalls & cleats to the base belt, resisting separation & delamination over time.
- Hot bonding prevents sidewall & cleat separation in applications with elevated belt temperatures, where cold cure products often fail due to cement reversion.
- Hot bonding prevents bond failure due to extreme cold.
Hot Bonding process Protect Your Investment!
Our hot bonding process allows us to hot vulcanize both the cleats and sidewalls to the base belt, extending belt life in almost every application.
Advantages:
- Hot bonding dramatically increases the adhesion of the sidewalls & cleats to the base belt, resisting separation & delamination over time.
- Hot bonding prevents sidewall & cleat separation in applications with elevated belt temperatures, where cold cure products often fail due to cement reversion.
- Hot bonding prevents bond failure due to extreme cold.
Base belts, sidewalls & cleats can be manufactured using a rubber grade specific to your application requirements. These cover grades include (but are not limited to) high abrasion resistant, oil resistant, flame resistant (MSHA, CSA-C, etc.), heat
resistant, and chemical resistant. Our technical staff will assist you in selecting the correct grade to suit your needs.