Dyno Nobel Inc.
TROJAN® TWINPLEX
|
TROJAN TWINPLEX cast boosters are detonator sensitive, high density, high energy molecular explosives designed with 2 detonator wells and an enlarged through-tunnel to accommodate the use of 2 detonators where required. TROJAN TWINPLEX cast boosters are formulated from the highest quality PETN and other high explosive materials ensuring reliability, consistency and durability in all blasting environments.
TROJAN TWINPLEX cast boosters are detonator sensitive, high density, high energy molecular explosives designed with 2 detonator wells and an enlarged through-tunnel to accommodate the use of 2 detonators where required. TROJAN TWINPLEX cast boosters are formulated from the highest quality PETN and other high explosive materials ensuring reliability, consistency and durability in all blasting environments.
The fluorescent green container and clear printing makes the TROJAN TWINPLEX booster more visible on the blast site (as well as in low light situations) and reduces the possibility of misplaced charges. The redesigned Caplock™ holds the detonator in place more securely and makes it more difficult for the detonator to be pulled out of the capwell position while it is being lowered into the borehole.
APPLICATION RECOMMENDATIONS
• ALWAYS use detonator(s) only with TROJAN TWINPLEX cast boosters.
• NEVER use detonating cord with TROJAN TWINPLEX cast boosters. The throughtunnel has been widened to accommodate two detonators, where required. Use of detonating cord may cause misfires, which may kill or injure.
• NEVER force the detonator into the through-tunnel, the detonator-well or otherwise attempt to clear these areas if obstructed. If the throughtunnel or detonator-well does not accommodate the detonator, do not use the cast booster. Notify your Dyno Nobel representative.
• Minimum detonator is No. 8 strength for temperatures above -40º C (-40º F). A high strength detonator is recommended for temperatures below -40º C (-40º F).
• Extremely low temperatures do not affect the performance of cast boosters with commercial detonators. Low temperatures do affect detonators and detonating cord. Be certain your initiation system is suitable for your application in extremely low temperatures.Cast boosters are more susceptible to breakage during handling in extremely cold temperatures.