Goodwin International Limited

Pump Cable

The cable comprises of four power cores (3 phase + Earth)
 
Each core is composed of multiple stranded circular annealed tinned copper wires complying with the requirements of BS 6360.
Pump Cable
The Goodwin range of pumps are supplied with 3 phase + earth armoured trailing cable for maximum protection against accidental damage – adding to the rugged reliability of the Goodwin submersible slurry pump.
 
This is tried and tested cable that is fitted to the Goodwin pump, and we will NOT supply any other cable between the pump and electrical control panel.
 
Distances may vary from pump to panel from installation to installation – please specify length of cable to be supplied with pump when ordering. (max cable length between pump and panel is 100m).
 
The cable comprises of four power cores (3 phase + Earth)
 
Each core is composed of multiple stranded circular annealed tinned copper wires complying with the requirements of BS 6360.
 
The outer cable protection consists of Chlorinated rubber sheathing which covers heavy duty galvanised steel armour, which in turn covers an inner Chlorinated rubber sheath which protects the three phase conductors and earth conductor. Each of the three phase conductors has its own composite copper screen, covering a nylon braid. The phase insulator is made of EPR, to BS 7655.
 
Voltage rating: 640/1100 volt cable to BS 6708:1977 and BC Specification 504:1981.
 
The durability of our cable and cable gland arrangement is so strong that customers have retrieved pumps by lifting them directly with the cable from a sump.
 
Goodwin always recommends that proper lifting tackle is utilized at all times and take no responsibility if a cable was to pull out if the pump (over 500kg) was lifted by it.