MMD Mineral Sizing (Canada)...

Feeders

To complement the capacity and strength of the MMD Twin Shaft Mineral Sizer, the MMD Heavy Duty Apron Plate Feeder are designed to handle the high impact loads created from large ROM material directly dumped onto it. MMD plate feeders are often arranged beneath tipping points, where their combination of reliability and robustness have proven to give many years of trouble free operation. MMD feeders are available in D4, D7, D9 and D11 configurations with either 1.5, 2, 3 or 4 metre widths respectively.

An MMD Plate feeder

   
The MMD Apron Plate Feeder is constructed from a series of specially rolled steel plates bolted to 2 strands of heavy duty Caterpillar™ chain. Both the plates and chain are supported by Caterpillar™ rollers, which are in turn attached to a fully welded one piece steel frame. This design provides maximum strength throughout the entire feeder and optimal impact dissipation, to minimise the amount of supporting steelwork.

Caterpillar Chain and Rollers

Download the Apron Plate Feeder Brochure Here  

The MMD D11 Heavy Duty Apron Plate Feeder completes the MMD feeder line up by being the largest apron plate feeder MMD have designed to handle material sizes.

Predominantly used in high volume surface applications the MMD D9 Apron Plate Feeder has been designed to accept exceptionally high impact forces in the loading area to allow large run-of-mine material.

The MMD D7 Apron Plate feeder is the most popular feeder we manufacture, mainly because of its high capacity and strength. Mostly used in surface applications it is suitable where large feed sizes are required.

The MMD D4 Apron Plate Feeder is the smallest Feeder in the series. With its compact size and lightweight requiring minimal supporting steelwork it is ideally suited to the cramped conditions.