Home >
Suppliers Companies
> Atlas Dewatering Corporation >
Products > Godwin HL Series > GODWIN HL160M
Atlas Dewatering Corporation
GODWIN HL160M
|
The Godwin Dri-Prime HL160M pump offers flow rates to 2140 USGPM and has the capability of discharge pressures to 268 psi.
The Godwin Dri-Prime HL160M pump offers flow rates to 2140 USGPM and has the capability of discharge pressures to 268 psi.
The HL160M is able to automatically prime to 28' of suction lift from dry. Automatic or manual starting/stopping available through integral mounted control panel or optional wirelessremote access.
High discharge pressure, dry-running, and portability make the HL160M the perfect choice for mining, industrial and emergency fire backup applications.
Features and Benefits
Simple maintenance normally limited to checking fluid levels and filters.
Please contact the factory or office for further details. A typical picture of the pump is shown.
All information is approximate and for general guidance only.
Dri-Prime (continuously operated Venturi air ejector priming device) requiring no periodic adjustment or control. Optional automatic onoff control available on the priming system.
Dry-running high pressure liquid bath mechanical seal with high abrasion resistant solid silicon carbide faces.
Close-coupled centrifugal pump with DriPrime system coupled to a diesel engine or electric motor.
All cast iron construction (stainless steel construction option available) with cast steel impeller.
Also available in a critically silenced unit
which reduces noise levels to less than 70dBA at 30'.
Standard engine Caterpillar C15 (T3 Flex).
Also available with Caterpillar C15 (IT4).