Repair / Condition Report

12015 Hours - ECM Idle Hours: 3847

Upon purchase inspection we completed the following:

• Engine oil filter was cut open and checked for contaminates and it was clean.

• Transmission and hydraulic filters were also cut open and inspected and they were clean.

• Both differentials and all four wheel planatary oil levels were clean and levels were good.

Following is a list of the repairs completed by Marcel Equipment Limited at 12015 hours:

• Machine was serviced.

• Installed NEW pins and bearings on the boom to frame mount.

• Installed a NEW block heater cord.

• Repaired the air suspension system for the seat assembly.

• Repaired the rear wiper unit.

• Checked all lights for proper operation.

• Repaired the ride control system.

• Repaired any miscellaneous leaks.

Following are the repairs completed by the previous owner and their local Caterpillar dealer:

• Installed a NEW front differential yoke and seal at 12008 hours.

• Installed a NEW hydraulic pump at 11512 hours.

• A NEW air conditioning compressor was installed at 10648 hours.

• Installed NEW articulation bearings at 10319 hours.

• In August 2010 the torque converter was REBUILT.

• This unit is ready to go to work.