Home >
Suppliers Companies
> Quatro Industries Ltd. >
Products MATO Corporation Products > Belt Fasteners > Heavy Duty Conveyor Belt Lacing Systems
Quatro Industries Ltd.
Heavy Duty Conveyor Belt Lacing Systems
|
The MATO Heavy Duty Belt Lacing Systems include:
• U30 Series
• E30 Series
• H30 Series
HD Safety System U30
Machine Install Fastener
The MATO Safety System U30 is effective for use in belts up to 3500 kN/m or 2000 P.I.W.
Its extremely effective when installed in high strength belts where safety and reliability is essential.
The main applications are:
• Coal Mining
• Ore Mining
• Gravel Pits and Quarries
• Cement and Steel plants
• Snowcats
• Industry
The System E30 is a reliable and economic system recommended for use in conveyor belts where it's necessary to change splices frequently.
The main applications are:
Eco System E30
Machine Install Fastener
The MATO Eco System E30 is effective for use in belts up to 1050 kN/m or 600 P.I.W.
The System E30 is a reliable and economic system recommended for use in conveyor belts where it's necessary to change splices frequently.
The main applications are:
• Coal Mining
• Aggregate
• Agriculture
• Industry
System H30
Hammer Installed Fastener
The MATO Hammer System H30 is recommended for belts up to 1400kN/m or 800 P.I.W.
The fastener has pre-set staples and is quick and easy to install. The plate sets itself to the belt thickness making it ideal for worn belts.
The fastener is supplied in strip lengths to suit different belt widths and is recommended for use in the following industries:
The fastener is supplied in strip lengths to suit different belt widths and is recommended for use in the following industries:
• Coal Mining
• Aggregate
• Agriculture
• General Industry
Belt Lacing Machines
To Suit HD U30, E30
Manual:
• Advancing and fastening system is performed manually.
• The screw clamping frames are available in various sizes to suit the required belt width.
Pneumatic:
• Advancing is performed manually and fastener installation is performed pneumatically.
• The screw clamping frames are available in various sizes to suit the required belt width.
Hydraulic:
• Advancing is performed manually and fastener installation is performed hydraulically.
• The screw clamping frames are available in various sizes to suit the required belt width.
Belt Lacing Tools
To Suit H30 Hammer Tool
• The tool bed is lightweight making it easy to carry. The punch and holder are easy to operate and designed to give long service life. The tool will install H35A and H37 fasteners by simply turning the belt stop pins. The fastener strip is installed by locating onto the belt stop pins and secured by positioning the retaining rod through the holes in the belt stop pins.
• Sizes are available for belt widths 36", 42", 48", and 54". Other sizes are available upon request.
Connecting Pins
To Suit Heavy Duty Fasteners
PKG
• Special steel cable with armour wrap for longest service life. Also with a screw thread for use with sealed fasteners.
• Standard eg P3KG
LS
• Low cost wire version:
○ Stainless steel cable
PSG
• Stainless steel cable with armour wrap, also with a screw thread for use with sealed fasteners.
• Standard: eg P3SG
L
Low cost wire version:
○ Zinc plated cable
PS
• Stainless steel cable with armour wrap.
• Standard: eg.P1S