AMG Metals
Anchors
|
AMG Preset anchors for structures and poles are furnished as a complete assembly, complete with a plywood template to assist in the setting of the anchor and guaranteeing the Bolt Circle Diameter (BCD) will not vary.
AMG Preset anchors for structures and poles are furnished as a complete assembly
AMG Preset anchors for structures and poles are furnished as a complete assembly, complete with a plywood template to assist in the setting of the anchor and guaranteeing the Bolt Circle Diameter (BCD) will not vary.
Preset anchor options include a square headed levelling stud to allow for adjustment after installation of the anchor and are designated by the letter “S” i.e. DGR-1S or DGR-2S, or A325 galvanized hex bolts.
The four Hi-Tensile bolts or studs, four round washers and anchor cage are hot dipped galvanized to ASTM-A 153. The anchors are available with 20mm(3/4″), 25mm(1″), 32mm(1-1/4″) or 38mm(1-1/2″) diameter bolts or studs.
Below is our standard size chart, and approvals by governing body. Outside of those sizes, AMG can custom fabricate to any BCD, Square centre to centre dimension, bolt diameter and length or depth.