Home >
Suppliers Companies
> Newterra Ltd. >
Products > EPRO Reverse Osmosis Systems > EPRO P RO System
Newterra Ltd.
EPRO P RO System
|
EPRO ™ P systems are designed to maximize water purification efficiency and produce high-quality clean water from tap water or brackish water. Clean water is dispensed from the system’s pressurization tank for immediate use, such as in laboratory applications.
EPRO ™ P systems are designed to maximize water purification efficiency and produce high-quality clean water from tap water or brackish water. Clean water is dispensed from the system’s pressurization tank for immediate use, such as in laboratory applications.
Features and Specs
Complete RO systems with efficient, high quality pumps, motors, and membranes for energy savings and low maintenance
Up to 99.4% purification rate 2 provides clean water with improved wash/rinse characteristics, reducing service cost of equipment and appliances by removing harmful chemicals and minerals
Up to 50% recovery rates 3 minimize water waste
Compact, pre-assembled design enables installation in under 2 hours, limiting start-up costs and space requirements
20 gallon repressurization bladder tank (7.4 gal. draw-down)
Pure water dispenses from threaded tap on front panel
Automatic feed water shutoff valve
Automatic tank level control (RO refills tank)
Flow meters for product and discarded water
Liquid filled pressure gauges
Electronic controller with low-flow switch
5 micron sediment pre-filter
Self-priming pump dispenses 3 GPM at 50 PSI (0.01 m 3 at 446 kPa)
110/220 V 1 phase 60 Hz TEFC motor
Applications
Purification of home water supply
Car wash rinse water (for spot-free shine)
Laundries and cleaners
Food and beverage production, bottling
Pharmaceutical production/laboratories
Paint and assembly
Electronics fabrication
Boiler & cooling tower makeup water
Misting, humidification
Nurseries, greenhouses
Commercial printing
Options
Coldwater membranes (when using cold water source)
Digital TDS monitor on control box
Recycle flow meter and throttling valve
Permeate and auto-flush
Higher-volume dispensing pumps: 4 GPM at 50 PSI (0.015 m 3 at 446 kPA), 9 GPM at 30 PSI (0.034 m 3 at 308 kPa)
110/220 V 1 phase 50Hz TEFC motor