Home >
Suppliers Companies
> Process Flow Systems >
Products > SJE Rhombus Control Panels > Model 32S
Process Flow Systems
Model 32S
|
Three Phase Duplex Alternating Pump Control with Override in Stainless Steel Enclosure
The Model 32S control panel is designed to alternately control two three phase pumps in industrial and commercial water and sewage systems using the robust DPC-4F Pump Control Four Float Controller for pump sequence, alternation, selection, lag pump delay time and alarm.
If a high water alarm condition occurs, the high water alarm float activates the audible/visual alarm system along with auxiliary contacts for remote alarm. Common applications include lift stations and pump chambers. Models available with intrinsically safe relay for circuit extension into hazardous locations.
Features
Panel Features:
Padlockable NEMA 4X stainless steel enclosure
Single-point incoming power connection
IEC HP rated motor starter with adjustable overload module
10HP max @ 208V; 240V; 480V three phase
Class 10 ambient compensated overload relay
Pump short circuit disconnect and overload reset accessible through the inner door
Tri-voltage step-down control transformer
Separate alarm/control fuses
Override circuit to operate lag pump if lead float fails
Alternator relay for even run time
22mm pilot devices with engraved labels
Seal leak circuits for single or double probe pumps
Red flashing alarm beacon and audible horn
Pump run indicator lights
Seal leak indicator lights
Alarm silence/test push button
Hand-Off-Auto selector switches
Overtemp shutdown for motor winding temperature switches (auto reset)
16 AWG MTW control wire
Lag delay timing relay
Elapsed time meters
Auxiliary alarm contact
Overload Modules (sold separately, each panel requires two modules):
Overload module, 1.25 – 5.0 FLA
Overload module, 4.5 – 18.0 FLA
Overload module, 8.0 – 32.0 FLA
Option:
Lighting arrestor
UL/cUL Listed
Five-Year Limited Warranty
Specifications
ENCLOSURE:
20 x 16 x 8 inches (50.8 x 40.6 x 20.3 cm) TYPE 4X stainless steel with mounting feet
ALARM HORN:
95 decibel rating