PORTABLE UNITS, WELDING SOURCE CAPTURE

OVERVIEW:

Portable Filtration Units are offered in both cartridge and HEPA filter configurations. A variety of media options are available for both. Our fume arms may be added to these units for source capture applications. Typical applications, for these units, are welding/maintenance shops, school/shop environments, and other locations where a permanently installed system is not practical.

FEATURES:

• Offered in both cartridge and HEPA filter configurations

• 7’ and 10’ arm length configurations available

• Optional filters available

• Plugs into standard 120-volt outlet, supplied with 25’, 12-gauge, 3-wire cord with ground plug

• Available less arm for duct connection

• Heavy Gauge Steel Cabinet

• Baked enamel finish

• Internal air distribution- baffle - spreads dirty air evenly across filter

• Dirty air chamber, clean air chamber, doors sealed air tight

• 5” hard rubber ball casters with foot brakes

• Control panel includes: On/Off rocker switch, On/Off indicator light, Filter indicator light, operation hours counter

BENEFITS:

• Small footprint

• Easily transported

• Discharges clean air back into workspace

APPLICATIONS:

• Welding/Maintenance Shops, School Shop Environments, Anywhere a Fixed Filtering System is not practical

 

PHS, PCFS TECHNICAL DATA

• Motor: 1.5 HP, 1 PH, 3450 RPM

• Fan: 750 CFM Actual

• Weight PCFS: Cabinet less arm - 360 lbs.

• Weight PHS: Cabinet less arm - 300 lbs.

• Cabinet: 18-gauge steel with epoxy powder coating

• Wheels: 4 Casters, 5” Diameter, with Locking Feature

• Voltage: 115/120/1 Pre-wired power cord

• AMP Draw: Start-up requires 13 AMPS - minimum 20 AMP Service

• Filter Monitor Lights: Standard on all units

-----------------------------------------------------------------------------------------------------------------------------------------------------------

HEPA SYSTEM, THE PHS

APPLICATIONS: Welding, Soldering, Brazing, Light Oil Mist, Fumes

Models: PHS-7, PHS-10 7’ or 10’ Arm, 1.5 HP/1-PH Blower, Poly Pre-Filter, 24x24x12 HEPA Filter

PHS 1.5 HP/1-PH Blower, Poly Pre-Filter, 24x24x12 HEPA Filter

The PHS features a portable design (26” x 26”), while maintaining a high CFM. 

When floor space is at a premium and performance is in demand, the PHS meets the challenge! The system is shipped assembled and ready to use. The PHS is available with a 7’ or 10’ arm,

or without an arm for fixed station or hard

duct.

The PHS is supplied with a 24”x24”x2” poly prefilter (#1) and with a 24”x24”x12” HEPA Filter (#3). The HEPA is a 99.97% filter. An optional 24”x24”x2” carbon filter is also available (#2). Accessing the filters is easy with a hinged door on the front and pull out trays.

---------------------------------------------------------------------------------------------------------------------------------

CARTRIDGE SYSTEM, THE PCFS

APPLICATIONS: Welding, Dust, Powder, Grinding

Models:

PCFS-7, PCFS-10 7’ or 10’ Arm, 1.5 HP/1-PH Blower, CF Stand, Clean-Out Tray, Manual Air Cleaning Plenum

PCFS 1.5 HP/1-PH Blower, CF Stand, Clean-Out Tray, Manual Air Cleaning Plenum.

The PCFS utilizes a multi-purpose cartridge filter. The unit is compact and user-friendly, while offering a high CFM and easy positioning of the arm and hood.

The foot print is just 27” square, perfect for tight confines. Swivel wheels and an easy push handle are an added benefit. The unit ships assembled and ready for use!

The PCFS is supplied with a unique sealed manual air pulse cleaning system (photos, lower right). Simply swing open the air plenum access door and the inside of the cartridge filter is accessible. For cleaning, use shop air - with an air wand. The cleaning procedure requires no pulse valves or electrical components, thus preventing needless failures. The unit is supplied with a filter monitoring light.

The standard filter is a 12”x24” polyester/cellulose media. Optional cartridge filters available include: 12 x 24” flame retardant media or a 12” x 24” special coated filter for moisture/light oil applications. The unit is supplied with an access door for easy filter change and dust bin access.

--------------------------------------------------------------------------------------------------------------------------------------------------------------

FILTOO - MOBILE FILTER UNIT

• Mobile filter unit that can be used for applications requiring the filtration of fumes, dust, and even gases. The polluted air is extracted and directed into the filter unit by either a self-supporting suction arm, downdraft table or suction hose.

• Several stages of filtration exist and the clean air is then returned to the work space. The Filtoo is a plug and play system that is ready for operation. It is only necessary to connect the intake elements before commissioning the unit.

• The housing is constructed of heavy gauge steel and powder coated inside/out. The filter elements are accessible via maintenance access door. The unit is equipped with multi stage filtration to cover wide range of dusts, fumes and particulate.