EZ-TAILSKIRT™ Conveyor Skirting

As part of the EZ-SKIRT Conveyor Maintenance System, our EZ-TAILSKIRT is the simplest Tailskirt in the conveyor industry to use and maintain.  Installation is simple, Cut the EZ-SKIRT Stainless Steel Hanger to length, then cut the EZ-TAILSKIRT to length and install just as you would as the EZ-SKIRT Skirting system. Tap down the skirting with a rubber mallet to the proper position.


Part One - Stainless Steel Hangers

EZ-SKIRT Conveyor Stainless Steel Hangers come in Five (5) foot lengths, which are easier to install and maintain. The serrated channels, which are cut every 4 inches keeps the rubber skirting from creeping up, and also allows the skirting to be properly positioned for any portions of your conveyor that maybe uneven, to prevent spillage. Using 304 gage Stainless Steel, Hangers are built to last !  Each one is laser precision cut to exact specifications and throughly inspected for quality control.  You can rest assure that this will be the last hanger system you will ever need to replace.


Part Two - EZ-SKIRT Rubber Skirting

Made from durable, long lasting 40 and 60 durometer rubber, the skirting is press molded individually and hand trimmed to exact specifications.  Soon after, a quality control expert inspects each piece for any flaws or abnormalities.

With this simple Two-Part System, you cut and mount the 5-foot stainless steel hangers where needed, insert the skirting “T” lugs into the serrated channels, and adjust the skirting into the proper position. This is why EZ-TAILSKIRT Conveyor Skirting System is called the SIMPLEST and EASIEST ever invented.