Eaton Industries
Network Connectivity
Eaton’s full range of network connectivity devices enables you to remotely monitor and manage your power quality equipment. From outlet by outlet energy consumption reports to temperature and humidity readings, connectivity devices give you full control of your IT environment from off site.
Eaton BestLink Web/SNMP Adapters are network adapters for FERRUPS and legacy Best Power UPS systems that provide SNMP, HTTP, SMTP, WAP and Telnet compatibility and advanced RS232 communications. These adapters allow easy monitoring, management and if necessary, safe shutdown or re-boot of UPS-protected servers, routers, hubs and other key inter-networking devices in a controlled manner. BestLink Adapters are a self-contained link between the UPS and Ethernet LAN/WAN, allowing your UPS to be remotely monitored and controlled from the next room, building, region or even another country, with no additional overhead on any server.
The Eaton ConnectUPS-BD Web/SNMP Card allows you to connect your Eaton UPS directly to the Ethernet network and the Internet. This unique solution allows you to conveniently monitor and manage your UPS with a standard web browser, while simultaneously providing graceful shutdown for multiple computer systems over the network. This model is designed for Eaton UPSs with a BD slot.
The Eaton ConnectUPS-E Web/SNMP Device creates a convenient way to monitor and manage Eaton UPSs. By using this connectivity device to connect your UPSs directly to the Ethernet network you gain the ability to remotely control and reboot UPS-protected equipment.
The optional environmental monitoring probe (EMP) for rack PDUs is a connectivity device that enables you to collect temperature and humidity readings in the rack environment and monitor the environmental data remotely using a Telnet connection or a standard web browser. You can also collect and retrieve the status of two contact devices.
The optional environmental monitoring probe (EMP) is a connectivity device that enables you to collect temperature and humidity readings in rack enclosures and monitor the environmental data remotely using a Telnet connection or a standard web browser. You can also collect and retrieve the status of two contact devices.
The optional Eaton Environmental Monitoring Probe (EMP) Gen 2 is a connectivity device that enables you to collect temperature and humidity readings in rack enclosures and monitor environmental data remotely using Eaton's power monitoring solutions or a standard web browser. Each EMP provides one temperature, one humidity and two dry-contact status data points. Compatible with UPSs and PDUs, the EMP Gen 2 features a translucent case and integrated LED to positively identify the status of each sensor at a glance while walking the aisles.
Configure your own UPS-based power management system using an Eaton Expansion Chassis. This connectivity device expands communication methods for a UPS through its included Modbus card and two additional slots for X-slot cards, easily integrating UPSs into open architecture management systems.
The Eaton Gigabit Network Card (Network-M2) is Eaton’s latest UPS network management card that delivers IT professionals with new and exciting capabilities and features. With better speed and cybersecurity, the Gigabit Network Card improves business continuity by providing warnings of pending issues to administrators and helping to perform orderly shutdown of servers and storage.
Remotely input UPS information to an alarm system, PLC or computer system using the Eaton Industrial Relay Card-Mini Slot. This card provides the dry-contacts needed to enable communication throughout your management and UPS systems.
The Power Xpert Gateway X-Slot UPS Card brings your Eaton UPS to your desktop. Monitor and manage your Eaton UPS remotely through real-time email alarms and data logging. Compatible with Eaton uninterruptible power systems with X-slot compatibility, the Power Xpert Gateway X-Slot UPS Card easily integrates your Eaton UPSs into your existing Ethernet infrastructure, minimising installation costs. Monitor a single UPS via the card and its web interface or integrate multiple UPSs and other data centre equipment into Power Xpert software and Power Xpert reporting for a comprehensive system view.