Home > Suppliers Companies > Aquatech > Products > Our Products > DPC300 Dri-Prime Pumps

DPC300 Dri-Prime Pumps

The Godwin DPC300 automatic Dri-Prime 12" (300mm) centrifugal pump has gained recognition as the industry leader in high volume bypass pumping over the last fifteen years. With flows to 5,000 gallons per minute (315.5 l/sec.) and solids handling to 3-1/2" (89mm) in diameter, the DPC300 moves large volumes of water while providing the ease of automatic priming to 28 feet (8.5M). The convenience of a low profile discharge flange makes pipe connections easy and efficient. When the job calls for high volume, the Godwin DPC300 is the benchmark by which all others are judged.


Technology Data

Weight 7,265 lbs. (3,295 kg.)
Dimensions DPC300 — John Deere 6068T, Skid Base


Open full description in this PDF.  


• Direct drive automatic priming 12" (300mm) high volume centrifugal pump with vacuum priming compressor mounted to a diesel engine. Available in electric drive or as bare shaft pumpend.

• All cast iron construction with 4 vane cast iron impeller.

• Extensive application flexibility — will handle raw sewage, sludges and liquids with solids up to 3-1/2" (89mm) in diameter.

• Continuously operated “Godwin” air ejector priming device requiring no form of periodic adjustment or control.

• Dry running, oil lubricated, mechanical seal with abrasion resistant solid silicon carbide interfaces.

• Solids handling swing check Non Return valve at pump discharge.

• Skid base incorporating integral overnight running fuel tank.

• Simple maintenance — normally limited to checking engine oil, compressor oil, and seal lubrication.

• Standard engine — John Deere 6068T. Available with a variety of engines including Cummins, Caterpillar and Deutz.

• Low profile side discharge for easy pipe connection.

• Balanced unit with centralized lifting bracket for easy handling.

• A variety of silenced units are available.