Isonor Inc
Wall Sleeves and Seals
|
Compression Wall Seal
The compression Wall Seal can be used with the Wall Sleeve or can be used alone where a field core drill is preferred. It creates a watertight seal between the core drill surface and the outerejacket of Ecoflex Piping. For new concrete walls, install over the pipe and into teh Wall Sleeve for a watertight seal. For an existing wall with a field core drill, install between core drill surface and outer jacket of the Ecoflex pipe. Refer to the Uponor Pre-Insulated Pipe Systems Design and Instllation Manual for more information.
Wall Sleeve
Uponor's Wall Sleeve is a wall-penetration accessory to ease installation of Ecoflex piping. The Wall Sleeve can be field-cut for proper fit within concrete forms and used with the Compression Wall Seal or Heat Shrink Sleeve. Although not engieered for specific bearing loads, it offers installation convenience and compatibility. For an existing wall with a field core drill, install between core drill surface and outer jacket of the Ecoflex pipe. Refer to the Uponor Pre-Insulated Pipe Systems Design and Instllation Manual for more information.
Wall Sleeve with Heat Shrink Kit
Uponor's Wall Sleeve with Heat Shrink Kit is a wall-penetration accessory to ease installation of Ecoflex piping. The Wall Sleeve, along with Heat Shrink Seal Kits are used for new block construction or irregular holes drilled through existing walls. Created for convenience and compatibility, this product offers another way to save time and installation costs.
