Superior Glove Works Ltd.
Palm-Coated Gloves
Adding a layer of protection to a string-knit glove can change everything. You get the same comfort, but with a lot more possibility. We use a wide range of tough materials in our palm-coated gloves, over a wide range of string knits. Endless combinations are the result of combining cotton, nylon, Kevlar®, Dyneema® and composite-yarn gloves with palm coatings like latex, PVC, polyurethane, and nitrile, not to mention the foamed versions of some these coatings.
TenActiv™/HPPE/steel/composite filament fiber blend provides excellent cut resistance
Micropore nitrile coating does not absorb oils andiquids so hands stay dry
Craters act like tiny suction cups to improve grip in wet and oily conditions
Contains spandex in its composition for impressive comfort and tactile sensitivity
High abrasion resistance along with comfort and dexterity
Nitrile thumb crotch reinforcement to reduce wear in critical areas
Made with high strength TenActiv™ yarn for impressive cut resistance
Foam nitrile palm coating increases grip in wet and oily conditions
Lint-free shell eliminates risk of contaminants
Strategically placed leather thumb crotch reduces wear in critical areas to prolong glove life
WORLD’S FIRST 18 g Arc Flash Glove
18 g Kevlar® composite filament fiber shell of protection
Arc flash tested for Level 2, rated ATPV = 8.2 cal/cm2
Neoprene palm coating is excellent in dry and wet grip, great flame-resistant properties and good resistance to oil
ESD (electrostatic dissipating) carbon filament to impart anti-static properties
Foam nitrile coating provides good grip for lightly oiled parts
100% nylon seamless-knit shell is fast-drying and moisture-wicking
Unsurpassed comfort and dexterity
Back uncoated for cool comfort and flexibility
Blend of Kevlar®/Protex® yarns for impressive heat and cut resistance
Good for high heat applications with rated heat protection up to 260°C (500°F)
Good for winter protection to -5°C (25°F)
Neoprene palm coating is excellent in dry and wet grip, has great flame-resistant properties and good resistance to oil
Level 3 arc flash rating with an Arc Thermal Performance Value (ATPV) of 25 cal/cm2
13-gauge knit offers great balance between high dexterity and high abrasion resistance
TenActiv™ yarn is comfortable, breathable and will not absorb sweat/moisture
Black foam nitrile palm coating acts like sponge for better grip in wet and oily conditions
Color of glove hides dirt to extend life in between washes
¾ foam nitrile coating
Also available in a palm-only coated version (#STAFGFNT)
TenActiv™/HPPE/steel/composite filament fiber blend provides excellent cut resistance
ANSI cut level A6 protection
Polyurethane palm coating provides excellent grip
Thumb crotch is reinforced with nitrile coating to reduce wear in critical areas
Fine-gauge polyester is highly touch-sensitive and non-linting
Polyurethane coating provides great grip and low-particulate shed
Great for fine assembly and where contamination is a concern
Excellent value for a glove of this quality
Snug fitting for all day comfort and dexterity