Home >
Suppliers Companies
> Sling-Choker Mfg. (Timmins) Ltd. >
Products > Pumps > BJM Submersible Pumps
Sling-Choker Mfg. (Timmins) Ltd.
BJM Submersible Pumps
|
BJM Pumps® supplies a wide variety of submersible pumps and pump accessories for many different applications. Some of these products include slurry pumps, stainless steel pumps, corrosion resistant pumps, sump pumps, sewage pumps, trash pumps, sludge pumps, non-clog pumps, solids handling pumps, shredder pumps, vortex pumps, submersible dewatering pumps, sand pumps, agitator pumps, hydraulic pumps, explosion proof pumps, utility pumps, and specialty pumps such as 12 Volt pumps and residue pumps (or Mop-Up-Pump). Experienced manufacturers of submersible pumps and accessories for a wide array of industrial applications, BJM Pumps provides a complete line of standard and specialty pumps — always engineered to meet the most stringent requirements.
R SERIES
TOP DISCHARGE / SLIM-LINE
DEWATERING PUMPS
APPLICATIONS
CONSTRUCTION SITES
FLOODED BASEMENTS
PONDS, FOUNTAINS & WATERFALLS
PLANT WASTES AND WASH DOWN
GENERAL DEWATERING
Design and Construction
304SS motor housing; superior to pumps with aluminum housings that wear out pumping sandy water.
Hard - cast iron impellers and volutes. Superior motor protection
Built-in high temperature switch protects the motor from overheating and shorting if the pump runs dry.
3 seals: lip seal, 2 mechanical seals; silicon carbide and carbon/ceramic.
Max water temperature 104°F. (Contact BJM for high temperature applications up to 200° F).
Class F motor insulation on all models.
J SERIES
EFFLUENT / SUMP
DEWATERING PUMPS
APPLICATIONS
RAIN AND RUN OFF
PONDS
IRRIGATION
DIRTY WATER
EFFLUENT WASTEWATER
Design and Construction
Pumps are engineered and constructed to provide reliable sump water and effluent transfer.
Side discharge to achieve maximum flow rates.
J series pumps are versatile. Available in cast iron or 316SS.
Model J1500 is available in a high flow or high head version; almost 80ft. of head from a 2 HP pump.
Superior motor protection
Lip seal and double mechanical seals. Lower seal is silicon carbide/silicon carbide and upper seal is carbon/ceramic.
Seal Minder® (moisture detection circuit) is available on models J750 and J1500. Seal Minder helps prevent costly
motor repairs.
Built-in high temperature automatic overload switch protects against motor failure due to overheating.
SV SERIES
SOLIDS HANDLING / TRASH PUMPS
APPLICATIONS
SEWAGE AND SEPTIC WASTES
ANIMAL WASTES
PONDS
COLLECTION PITS AND SUMPS
EFFLENT WASTEWATER
Design and Construction
SV pumps are designed to pass mud, raw sewage, leaves, rags, wood chips, stringy and other solids without clogging.
Constructed with a cast iron volute and fully recessed vortex impeller for pumping solids without clogging.
Rugged construction (no breakable plastic components) and light weight make them portable and tough enough to stand up to job site handling.
Superior motor protection
Lip seal and double mechanical seals. Lower seal is silicon carbide/silicon carbide and upper seal is carbon/ceramic.
Seal Minder® (moisture detection circuit) is available on models SV750C and SV1500. Seal Minder® helps prevent costly motor repairs.
Built-in high temperature automatic overload switch protects against motor failure due to overheating.
SUBMERSIBLE LIGHT-WEIGHT
AGITATOR DEWATERING PUMPS
APPLICATIONS
ROCK / SAND PLANTS
COAL PREP PLANTS
LIME SLAKE
PITS
CONSTRUCTION SITES
GRIT CHAMBERS
DRILL MUD
MINES
ASH SUMPS
COAL SUMPS
Hard metal submersible dewatering pump
Designed and constructed for dewatering sand, silt, coal fines and abrasive light slurries
Chrome iron impeller and wear plate
Hardened ductile iron agitator and volute
Built-in agitator mixes settled solids with pump water to restore sump or basin volume
Light-weight
WET BASEMENTS/PLAY AREAS
INDUSTRIAL SPILL AND FLOOD CLEANUP
Pumps down to 1⁄12 inch
Built-in check valve prevents “back flow”
Lightweight and portable
Rubber-clad bottom protects floor
Same construction features as model R400
SMALL DEWATERING JOBS
GARDEN IRRIGATION FROM PONDS AND STREAMS
Quality engineered for long life
Silicon carbide seal
Class F motor insulation
ABS plastic and SS metal parts
High-temperature dry run motor protection
Weighs only 13 lbs
Includes 3⁄4" garden hose adapter