Sika Canada Inc.

Sika AnchorFix®-2 Arctic

Characteristics
• Sets up in dry, wet and flooded holes.
• Cures down to -26°C (-15°F) when material is pre-conditioned to at least 0°C (32°F).
• Styrene-free.
• Available in single piston cartridges
• Approved for threaded bars in concrete.
• Allows fixings close to free edges.
• Reduced drilling diameters i.e. 2 mm anchor clearance results in economic installation.
• Flexible embedment depths.
• Resistant to a wide range of chemicals, including aqueous solutions of acetic acid, aluminum chloride and aluminium nitrate at 10% concentration, jet fuel, diesel fuel, domestic kerosene and many other substances at 75°C (167°F) while retaining at least 80% of physical values.(See Chemical Resistance Guide).

Approvals/Certifications
• ETAG 001: Part 5, Option 7 approval for M8-M30 galvanised and stainless steel threaded bars (see specifics below*).
*4.6, 5.8, 8.8 & 10.9 galvanised steel & A4-70 and A4-80 stainless steel & 1.4529 HCR
threaded bars in C20/25 to C50/60 non-cracked concrete.

Colour
Grey

Packaging
• 300 mL (10.1 US fl. oz) single piston cartridges/12 per case
• 850 mL (28.7 US fl. oz) single piston cartridges/8 per case
Sika AnchorFix®-2 Arctic
Fast-Setting and Styrene-Free Epoxy Acrylate Anchoring Adhesive for Low Temperature Installations
 
Use
• Anchoring of rebar or threaded rods in concrete, masonry, voided stone and rock, hard natural stone and solid or hollow bricks and blocks.
• Grouting horizontally and vertically, where extremely rapid setting, fast turn-around times are needed.
• Best choice for inclement conditions, including cold temperatures and wet substrates.
• Grouting in external environments where applications are subject to dynamic loads and vibrations.
• Anchoring structural steel to concrete, safety barriers, balcony stanchions, canopies, signs, hand rails, racking, machinery, rolling cranes, masonry supports, stadium seats, reinforcing and starter bars.


Downloads