AFM Industries
Side Blinkers
|
Available as an option, side blinkers are placed between the wall and cleat. This installation will minimize the amount of material catching in between the corrugations and the cleat, therefore reducing carryback and spillage. Particulary useful in applications where the material is small and free-flowing.
Available as an option, side blinkers are placed between the wall and cleat. This installation will minimize the amount of material catching in between the corrugations and the cleat, therefore reducing carryback and spillage. Particulary useful in applications where the material is small and free-flowing.
Installation Hardware
All required installation hardware is provided with the belt including fasteners, washers and sidewall support fittings.
Hot Bonding process Protect Your Investment!
Our hot bonding process allows us to hot vulcanize both the cleats and sidewalls to the base belt, extending belt life in almost every application.
Advantages:
- Hot bonding dramatically increases the adhesion of the sidewalls & cleats to the base belt, resisting separation & delamination over time.
- Hot bonding prevents sidewall & cleat separation in applications with elevated belt temperatures, where cold cure products often fail due to cement reversion.
- Hot bonding prevents bond failure due to extreme cold.