Tank Alert® AB DUO

Tank Alert® alarms provide audio/visual warning of potential threatening liquid level conditions.

 

The Tank Alert® AB DUO (Auto reset, Battery backup, DUO alarm inputs) indoor alarm system monitors two liquid level conditions in one easy-to-install alarm for lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, filter and other waste applications.

 

The sleek design of the alarm features a user friendly touch pad with colored LED indicators for easy visual detection. The alarm horn and red LED indicator activate for a high level alarm condition. The alarm horn and yellow LED indicator activate for alarm 2. The green LED indicates 120V primary power to the alarm. Once the condition is cleared, the alarm automatically resets.

 

Features

 

DUO alarm inputs to monitor 2 levels

Colored LED indicators:

Red alarm 1

Yellow alarm 2

Green power on

NEMA 1 rated enclosure for indoor use

Automatic alarm reset

9 VDC battery backup with low battery chirp

Alarm test switch

Horn silence switch

External terminal block for easy float installation

Includes 15′ SJE SignalMaster® control switch

Can be used as a high level, low level or filter alarm

 

Options:

 

Auxiliary dry normally open and normally closed contacts

CSA Certified

Five-Year Limited Warranty

 

Specifications

 

VOLTAGE FOR 120V MODEL:

Primary: 120 VAC, 60 Hz, 2.4 watts max. (alarm condition)

Secondary: 9 VDC

 

BATTERY BACKUP POWER:

9 VDC

 

ALARM ENCLOSURE:

6 x 4 x 2.25 inches (15.24 x 10.16 x 5.71 cm), NEMA 1 plastic

 

ALARM HORN:

87 decibels at 10 feet (3 meters)

 

POWER CORD:

6 feet (1.8 meters)

 

AUXILIARY ALARM CONTACTS (optional):

Voltage: 120 VAC

Current: 0.5 amps maximum

 

FLOAT SWITCH CONNECTION TERMINAL:

For float switch connection only. Do not apply power. (Voltage across terminals is 8-9 VDC)

 

FLOAT SWITCH:

SJE SignalMaster® control switch with mounting clamp

Cable: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE)

Float: 2.74 inches diameter x 4.83 inches long (7.0 cm x 12.3 cm), high impact, corrosion resistant polypropylene housing for use in sewage and water up to 140°F (60°C)