John Crane Canada
Type 37FS
|
Features
• The elastomer bellows compression ring provides extreme flexibility. Shaft deflections, angular misalignment, and run-outs are "tracked" by the seal without diminishing performance. Type 37FS split seals solve shaft motion and vibration problems that prohibit use of other seal designs.
• The compression ring acts as the spring, eliminating clogging problems seen in fibrous or abrasive services.
• The wide sealing surface of the sealing ring prevents leaks even on the most worn, pitted shafts.
• Rotating assembly self-aligns itself square with the shaft for true running.
• Fewer parts and simple design allow for easy installation. Seal can be readily mounted on worn shafts and out-of-square stuffing boxes — no modification of equipment is needed.
Recommended applications
• Process Pumps
• Other Rotating Equipment
The Type 37FS fully split seal helps significantly reduce maintenance on larger, difficult-to-seal equipment. It is recommended for use on heavy-duty packed equipment that previously could not accommodate mechanical seals due to severe shaft run-out and vibration, difficult disassembly, worn-out equipment and similar problems. Its outside-mounted design allows it to be used on both vertical and horizontal applications.
Ideal for use on large, heavy duty rotating shaft equipment such as mixers, agitators, and pumps.
Commonly found in the demanding pulp and paper, power generation, food and beverage, wastewater treatment and mining industries.
Quickly and easily repairable, either on-site or at any John Crane Service Center.
PRESSURE LIMITS
SPEED LIMITS
Parameters
TEMPERATURE LIMITS
180°F/82°C
PRESSURE LIMITS
80 psi(g)/5.5 bar(g)
SPEED LIMITS
1800 rpm
Featured Products
