TechnoSub
HNS SERIES
|
Service Factor:1.15 or 1.35
4, 6 or 8 pole motors
Class H insulation
Available with Extended dry-run (2-8 hours under full load before tripping temperature sensor)
L10 Bearing Life in excess of 100,000 hours
Shaft stiffness ratio <1
Welcome the revolutionary Plenum54™ to the submersible world. The patented Hevvy Pressurized Slurry Sealing system combines an internal self-generating pressurization system with Hevvy’s Slurry seal range. Together, this creates an internal oil back pressure on the sealing area which at typical submergence depths will yield a greater internal pressure in the sealing chamber than the incoming slurry pressure, ensuring the ultimate seal life.
AVAILABLE PUMP ADD-ONS
Agitator
The Toyo patented agitator eliminates solids accumulating on the sump floor. It can significantly reduce maintenance costs from digging out sumps and downtime from solids building up and choking off the suction. The Toyo Agitator’s patented blade achieves the highest efficiency in material mixing.
Chopper
Heavy duty blades, located in front of the pump’s suction, agitates, chops, cuts and shreds incoming solids such as metal banding, plastic, wood, rags and bags, prior to them entering the impeller. The ‘chopper’ eliminates pump and system downtime by preventing the plugging of pump suctions and pipelines.
Jet Ring
When the material being pumped is not free-flowing and the agitator cannot put the solids back into suspension, look at adding a jet ring. The jet ring delivers high pressure water through nozzles to loosen up compacted and heavy solids and thus fluidizing dense solids mixtures into the intake of the pump.