Mechanical Fasteners
With its 70 years of experience and know-how, MLT Minet Lacing Technology is the European specialist of conveyor belts splicing solutions.
Flexible steel fastener has continuous claws, no risk to contaminated the carried product. It is easy to install with hammer tool.
The wire hook carded fastener joins conveyor belt with moderate tension for narrow belts.
Titan fastener has pre-assembled staples for high tension conveyor belts.
The Mini Record Fastener, aka MR, is a metal fastener with staples for thin conveyor belts. The staples, pre-positionned on the fastener, enable a strong resistance as well as maintain the fastener on the belt even in case of a strong load. Some versions of the range can even go up to an operating tension of 40N/mm.
The rivet fastener family is large and exhaustive. It is used to join belts from 1 to 18 mm with pulley diameters from 20 to 400 mm with no costly installation equipment.
The MS® fastener is an innovative and easy solution to splice by simply using screws.
Self-Lock® fastener is developed and patented by MLT. Its efficiency and easiness makes Self-Lock® a major innovation in the conveyor belt industry. The top face clamps itself into the belt by having the claws passing underneath the bridges and closing themselves: cleaning is facilitated. Continuous teeth/claws. The fastener avoids contamination from the transported product. They are inside the belt, it’s better for cleaning. Flat fastener, the Self-Lock grips the belt with good compression.