Diamondback DB40/DB80

Using the latest weight optimization tools, we have reduced the weight while still maintaining the strength and rigidity you demand — creating a rugged design that can handle even the toughest challenges.

 

The driller’s console pivots for good visibility during any operation, even with the head slid to the right side for running casing.

 

The cyclone hydraulic tank uses a centrifugal design on the inlet of the tank to spin the incoming oil, removing harmful air infused in the oil faster than a conventional tank, thus requiring less oil. It also provides increased flow and pressure to the pumps, helping prevent possible cavitation.

 

The tower design allows us to open up the area around the drill table and provide a maximum working area around the drill string. The customizable table meets your drilling requirements by choosing a 10-3/4 in, 17 in, or 24 in table opening. The bolt-on centralizer bushing and outer bushing adapter adapt the table on the spot for a wide range of through-the-table options.

 

Technical specifications

 

Compressor pressure 350 psi (24 bar) or 200 (13.8 bar)

Compressor flow 1070 cfm (30.3 cmm) or 550 cfm (15.6 cmm)

DB40 Pullback capacity 40,000 lb (178 kN)

DB80 Pullback capacity 80,000 lb (356 kN)

Pulldown capacity 30,000 lb (133 kN)

Tower length 34ft. 6 in (10.5 m) or 38 ft 6 in (11.7 m)