Repair / Condition Report

Machine Hours: 11206 - ECM Idle Hours: 5043 at 10824 Hours

Upon purchase inspection, we completed the following:

• Engine oil filter was cut open and checked for contaminates, it was clean.

• Transmission and hydraulic filters were also clean.

• Transmission suction strainer was clean as well.

• All four planataries and both differential oil levels were good and oils were clean.

• Engine high idle speed was checked and is within Caterpillar specifications.

• Torque converter stall speed was checked and is within Caterpillar specifications.

Following are the repairs completed by Marcel Equipment Limited at 10822 hours:

• Installed NEW pins and bearings on the steering cylinders.

• Installed a NEW radiator cap.

• Installed a NEW starter motor mounting gasket.

• Installed NEW bucket pins and bearings.

• Installed NEW bucket adapters and teeth.

• Recalibrated boom and bucket functions.

• Installed a NEW CAT reman water pump.

• Checked all electrical components for proper operation.

• Machine has been sandblasted, primed, painted and detailed.

• This unit is ready to go to work.