Home >
Suppliers Companies
> FLO Components >
Products > Off-Road Lube Systems > Automatic Hammer Lube Pump
FLO Components
Automatic Hammer Lube Pump
|
TYPICAL CENTRAL LUBRICATION SYSTEM LAYOUT
FLO's installed Automated Lubrication System consists of a 12/24 VDC Series 203 pump, UV positive displacement grease metering valves, fittings, tubing, hose and custom guarding. Pumps include an integrated adjustable timer for easy installation, trouble-free operation and maximum flexibility. Reservoirs range from 5 - 15 lbs. Our automated greasing systems service steering cylinders, center articulation, oscillating axles, lift cylinders, boom anchors, bucket joints, transmission hanger bearings, suspension cylinder, dump box pivots, drill mast bearings, hammer surfaces, "H" links on excavators, and more. The FLO lubrication system is suitable for most off-the-shelf North American greases currently in your shop. It will handle lubricants up to an NLGI #2 rating to -25 °C or -13°F.
This unique Automatic Hammer Lube Pump protects your Critical Breakers / Hammers. The pump attaches directly to your hammer, gripper or crusher and is connected to the hydraulic power supplier of the carrier. Your operator, with the push of a pedal, automatically sends a single shot of grease to lubricate the bearing points. When the operator's foot comes off the pedal and hydraulic fluid pressure is removed from the hammer, the drop in pressure releases the spring in the pump and recharges it so it is ready to lubricate again the next time the device is activated. Installed directly on the hammer, the pump travels with your hammer, not your machine.
Featured Products
