Home > Suppliers Companies > 3M Canada > Products Site Safety > Sorbents > 3M™ Maintenance Sorbent Rug
3M Canada

3M™ Maintenance Sorbent Rug

This rug is designed for use in industrial maintenance applications where foot and vehicle traffic is a concern, and will sorb most non-aggressive liquids . Each rug comes in a roll 36 inches by 100 feet and sorbs 10.5 gallons per roll.

Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/Case

Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations.

Caution
Sorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.

This sorbent rug is used in areas where foot and vehicle traffic is an concern. Designed to sorb liquids while enduring the punishment of being tread upon, it is both durable and versatile. The coated rug material can be used on a clean and smooth floor to insure that the material does not slip when walked upon. It may also be used as a barrier to protect the floor or other surface below it.

 

 

Packaging

3M ID: 70-0704-0623-9
Minimum Order Quantity: 1 CASE

  Imperial Metric
Length 10.250 INCH 0.260 M
Width 10.250 INCH 0.260 M
Height 36.000 INCH 0.914 M
Gross Weight 21.7000 LBS 9.8429 KG