Hella Inc

DuraLed® RCL

Product Features
• Impact resistant smooth Grilamid® lens
• Clear precision micro optics
• Multivolt™ 8-28V DC
• Low power
• Fully sealed “fit and forget”
• 0.6kg mass
• 200G shock impulse resistant
• Overheat, reverse polarity and short circuit protection
• Double insulated supply cable with DT plug (6 pin) or tinned wire
• –40ºC to +70ºC range
• High efficiency, long life
• IP6K6K and IP6K7K
• UL94 flame retardant rated external parts
• ADR compliant 
• Spares interchangeable with HELLA DuraLed® range
• CE compliant

All HELLA Mining LED products are covered by a five (5) year warranty on light output, excluding environmental and physical damage.

Rear Combination Lamp
DuraLed® RCL are “Fit and Forget” stop/tail/indicator/reversing combination signal lamps, utilising the latest LED technology, and engineered specifically for ultra heavy-duty applications on mining equipment and service vehicles.
DuraLed® RCL lamps are extremely robust, fully sealed truly “fit and forget” products, tolerant to severe vibration levels and very compact in design.
A high impact and shock resistant clear Grilamid® nylon lens is permanently bonded to a rugged, UV damage-resistant composite base for increased mechanical strength and maximum durability. HELLA engineered DuraLed® RCL lamps to ensure a very long service life and no lighting loss due to internal dirt build-up; they are also very well suited to wet and corrosive environments and tolerate short-term immersion.
Unlike normal signal lamps, HELLA DuraLed® products are maintenance free and extremely power efficient, which greatly reduces both operating temperature and demand on the vehicle’s electrical system. Maximum service life and light output of the high intensity LEDs is ensured by using internal heat sinks. The integral Multivolt™ control module also protects the DuraLed® RCL against damage from overheating, reversed polarity and short circuits. (See HELLA Mining Catalogue for more Multivolt™ information.)
Safe and reliable electrical connection is facilitated via a highly flexible double insulated cable sealed into the base, terminated as a short length with a DT connector or 2m cable with tinned wire ends. Other connector options can be supplied as special orders.
DuraLed® RCL lamps are equipped with advanced, clear micro optic lenses to prevent the hazardous occurrence of “ghost” signals by internally reflected light from other sources.
The smooth ergonomic design and very low profile (under 35mm) allows DuraLed® units to be installed on almost any surface.