Beka-Lube Products Inc

Hamax EP

The lubricating system for demolition excavators which are operated with the same tool the most time.

…also with hydraulic drive

Hamax EP
Advantages:
• Large reservoir for very long operating times without refilling
• Particularly economical operation: Grease from large containers
• Optional lubricant level monitoring for highest security
• Tried-and-tested technology with desmodromic pump elements
• Also with hydraulic drive
 
Function:
• BEKA HAMAX EP consists of a grease pump with steel reservoir (capacity 2 or 4 kg) and a pump element PE-120 V with manometer.
• To protect the pump against vibrations, it is installed directly at the excavator.
• The lub point at the tool is connected to the pump by a high-pressure coupling and a high pressure hose.
• As soon as the hammer is activated, the pump supplies the lub point with chisel paste.
• The output is regulated by an adjustable pump element.
 
BEKA HAMAX Special Feature:
Desmodromic activation of the pump elements for  highest operational reliability in a wide temperature range from
-35 up to +80° C.
 
Electronic Control:
The electronic control unit monitores the lubricant level in the reservoir. If the level is too low, the pump is switched off and a fault message is generated.
 
A start release relay can be integrated optionally: With start release relay it is not possible to start the machine if the reservoir is empty.
 
A very important feature especially for rental machines.
 
 
The Alternative with Hydraulic Drive:
 
Technical data:
• Operating temperature: -15°C to +80°C
• Outlets: max. 3
• Output per outlet: max. 0,12 cm³/Hub
• Position of installation: vertical
• Drive: Hydraulic motor with worm gear speed reduction ratio 150:1
• Consumption: min. 6 l/min, max. 17,2 l/min (= 1400 – 4000 min-1)
• Input pressure: min 30 bar, max. 210 bar
• Lubricant: copper chisel paste and all other kinds of grease