Resources

Frankfield East (subsequently renamed Bradshaw) Resource estimate completed using a block model with wireframes. Wireframes built using a cut-off grade of 3g/t over 2m. In mineralized regions which did not meet this requirement, a cut-off grade of 1 g/t over 2m was used. Block grades were assigned using inverse distance squared with a minimum of 4, maximum 10 samples and isotropic ellipse. Maximum search distance is 100m radius with the exception of HWZ2 and HWZ3 below 400m where 50m radius is used. Indicated resources are identified in the upper 400m of the deposit along a strike length of 950m where drill hole spacing is approximately 50m or less. Inferred resources are identified at a vertical depth from 400m to approximately 1000m.