Home > Supplier Companies > Borets Canada > News > New Developments for High...
Borets Canada

New Developments for High GOR Wells

Jul 22, 2014
The Borets Company has been always focusing on gas handling devices designing and upgrading. 
 
Over the past two years the Borets R&D Center designers have developed a number of gas handling devices including size 5 (362 Series) and 5A (405 Series) Vortex Gas Separators and Vortex Gas Handlers to increase pumping systems reliability in harsh production environments.
 
The Borets Company offers successfully lab tested and field proven Vortex Gas Separators. The Vortex Gas Separator is a device that utilizes a natural vortex action at centrifugal gas separation. The rotors are not applied. This design feature improves the Vortex Gas Separator reliability and performance as compared with the rotary gas separators of different designs. 
 
The Vortex Gas Separator design (expected) run life estimated by Gubkin Oil and Gas University based on stand testing results at 3,600 rpm and solids content 200 mg/l is 9 years. The run life increases at lower rpm.
 
The new GPRB series Vortex Gas Handlers are designed to improve ESP system performance in high GOR wells. The Vortex Gas Handler comprises two chambers on a common shaft: the bottom chamber – vortex separation chamber and the top chamber – a stack of axial flow stages for free gas has handling and compression at 4…5 kgf/cm².
 
The Vortex Gas Handlers provide stable ESP system operation in conditions of 70…90% free gas at the pump intake, solids content up to 1 g/l and fluid temperature up to 338°F (170°С). Vortex Gas Vortex Gas Handlers of sizes 5 and 5А are offered in a wide range of abrasion-resistant and abrasion/corrosion resistant designs without a shaft thrust bearing to meet the customers’ demands.

The Borets Vortex Gas Handlers comprise:
 - Abrasion-resistant radial bearings for superior shaft stabilization
 - Thick-wall vortex separation chamber sleeve made of chromium-nickel stainless steel
 - Stainless steel head and base
 - Base lower flange inner side with add-on protection.

Source: http://borets.com/pr/news/news/?tx_news_pi1%5Bnews%5D=48&tx_news_pi1%5Bcontroller%5D=News&tx_news_pi1%5Baction%5D=detail&cHash=a725cea29c214bec6b257eb5ed56a7ea

Spooler/Bander
  • Spools cable onto reel as the tubing is being pulled out of the well.
  • Bands cable onto tubing as the down unit and tubing are being run into the well.
  • Maintain cable service truck and trailer; perform daily inspections to ensure compliance with DOT regulations.
Test Automation Engineer

Support activities concerned with the design, programming and installation of electrically submersible pump test systems in all new and existing Borets’ Service Centers outside the Russian market.

Manager Field Service Quality & Training
  • Develop a schedule of F/S audits and perform them.
  • Develop and implement a training course for F/S technicians individually based on audit results.
  • Develop and implement calibration schedule for tools and F/S equipment.
Spooler/Bander
  • Spools cable onto reel as the tubing is being pulled out of the well.
  • Bands cable onto tubing as the down unit and tubing are being run into the well.
  • Maintain cable service truck and trailer; perform daily inspections to ensure compliance with DOT regulations.
Supervisor, Windchill CAD

Manage international (non-Russian) Windchill documentation system including the management of member, groups, roles and the many data types that make up the whole of the international organization’s documentation needs. 

Surveillance Engineer
  • Learns, and understands client field production goals and strategies.
  • Monitor applicable wells via remote monitoring software (or client’s monitoring system).
  • Identify, diagnose and communicates events to both client and internal Borets organizations
Sales Manager
  • Develop plans to achieve growth by specific customers through a combination of market intelligence, analytics, and customer intimacy.
  • Develop a business plan targeting specific markets and/or customers with product needs that align with Borets capabilities and implement targeted marketing efforts
Surveillance Engineer
  • Learns, and understands client field production goals and strategies.
  • Monitor applicable wells via remote monitoring software (or client’s monitoring system).
  • Identify, diagnose and communicates events to both client and internal Borets organizations
HSE Specialist, Senior
  • Ensure HSE compliance of all operations  by overseeing Engineering Controls, Administrative and Personal Protective Equipment requirements through company safety policies, standards and procedures, as well as, communicating and enforcing Federal, State, and local governmental regulations, i.e. EPA, OSHA, , DOT, NFPA, etc.
  • Implement and maintain company HSE documents adhering to local, state and federal environmental, health and safety regulations.
Rental Asset Specialist
  • Under direct supervision, assist with ensuring the yearly financial goals and KPI’s for the Electric Submersible Pump rental business are achieved.
  • Work with fundamental financial management control metrics.