Jumbo Operator
Dead Line: May 6, 2022
- Drug test
- Visually inspect, sound, scale and wash down work area, check for bootlegs and missholes, flags lifters, adds or repairs vent tubing.
- Assess ground conditions at the face and implement ground control according to site requirements
- Extend grade and center line, mark face for drilling and circle bootlegs, maintain hanging wall and foot wall control in junction with geologist.
- Capable of jackleg and/or stopper drilling as needed.
- Determine location, spacing, depth and inclination of holes.
- Perform minor repairs, such as changing striker bars, couplings, water tubes and hose clamps.
- Complete daily logbooks on equipment and submit written and verbal reports to supervisor.
- Load, prime, time, connect and test blasting circuit.
- Place guards at all entrances to the blast, blast according to project standards and remove guards after blasting.
- Maintain working area and equipment in a clean and orderly condition.
- Must be able to comprehend written and verbal instructions as required to perform his duties in a safe and efficient manner
- Must be able to follow proper procedure to ensure safety and to control equipment damage
- The duties and responsibilities listed above are representative of the nature and level of work assigned and are not necessarily all-inclusive.
- Ontario Hard Rock Underground Common Core – Full Basic (or other provincial equivalent) (required)
- Required specialty (U0089)
- 5 years or more experience with Jumbo Drill machine in mining field
- Valid C or F classification Driver license an asset
- Demonstrated ability to read mine plans and specifications for underground mining.
- Ability to multi task and work effectively
- Ability to work efficiently as part of a team as well as independently
- Having the authority and responsibility to maintain a safe and efficient working environment
- Following Company health and safety standards and reporting any unsafe acts or conditions to Supervisor
- Responsible for the use and maintenance of all safety equipment, i.e. Lanyards, warning signs and labeling, according to company rules and applicable legislation.
- Responsible to ensure proper use and maintenance of personal protective equipment.
- Must have knowledge of the WHMIS legislation and know how to effectively use an MSDS sheet.
|
Under the supervision of the Shift Supervisor, the primary role of the Truck Driver is to haul and dump broken ore and waste from development or production headings.
Under the supervision of the Superintendent, the primary role of the Shift Supervisor is to coordinate the daily activities of the mine development according to plan and is completed to standards.
Under the supervision of the Lead Miner and/or Shift Supervisor, the primary role of Miner is to inspect existing underground headings, scale loose rocks and install ground support to stabilize rock mass and ensure safety.
Under the supervision of the Lead Mechanic, the primary role of the Mechanic is to perform preventive maintenance and repairs to diesel, electrical, hydraulic and air operated equipment.
Under the supervision of the Mechanical Supervisor and/or Underground Superintendent, the primary role of the Lead Mechanic is to perform preventive maintenance and repairs to diesel, electrical, hydraulic and air operated equipment.
Under the supervision of Superintendent, the primary role of the lead electrician is to install, wire, maintain & perform preventive maintenance and repairs to electric equipment in surface and underground areas.
Under the supervision of the Shift Supervisor, the primary role of a Jumbo Operator is to set up and operate a two-boom Sandvik jumbo to drill and blast in a safe manner.
Under the supervision of the Superintendent/ Shift Supervisor, the primary role of a Cage Tender is operate mineshaft conveyances which may include skips and/or cages and other devices that are used to move workers and material within the mine shaft safely.